高级检索

ISSN1001-3806CN51-1125/TN 网站地图

留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

MEMS金属微构件的激光微喷丸强化技术分析与展望

樊玉杰 周建忠 黄舒 卫登辉 王敏

引用本文:
Citation:

MEMS金属微构件的激光微喷丸强化技术分析与展望

    作者简介: 樊玉杰(1979- ),女,博士研究生,主要从事激光冲击方面的研究..
    通讯作者: 周建忠, zhoujz@ujs.edu.cn
  • 基金项目:

    教育部博士点基金资助项目(200802990004);江苏省高校自然科学基金重大项目基金资助项目(08KJA460002);江苏省自然科学基金资助项目(BK2009219);江苏大学校科研项目基金资助项目(CX08B_06x)

  • 中图分类号: TN249;TG156.99

Analysis and development of microscale laser shock peening oriented metalic components in MEMS

    Corresponding author: ZHOU Jian-zhong, zhoujz@ujs.edu.cn ;
  • CLC number: TN249;TG156.99

  • 摘要: 介绍了适用于金属微构件处理的激光微喷丸技术,通过控制工艺参量和合理的路径规划,在试件表面产生有益的残余压应力分布,能有效提高工件的抗疲劳和磨损性能。概述了微喷丸技术的研究现状,总结了激光微喷丸的机理、关键技术和影响因素,分析了激光微喷丸研究中存在的问题,为今后激光微喷丸技术的进一步研究提供指导。
  • [1]

    van SPENGEN W M,PUERS R,MERTENS R,et al.A low frequency electrical test set-up for the reliability assessment of capacitive RF MEMS switches[J].Journal of Micromechanics and Microengineering,2003,13(5):604-612.
    [2]

    BRAZZLE J D,TAYLOR W P,GANESH B,et al.Solution hardened platinum alloy flexurematerials for improved performance and reliability of MEMS devices[J].Journal of Micromechanics and Microengineering,2004,15(1):43-48.
    [3]

    MILLER S L,RODGERS M S,la VIGNE G,et al.Failure modes in surface micromachined microelectromechanical actuation systems[J].Microelectronics Reliability,1999,38(8):1229-1237.
    [4]

    HENCK S A.Lubrication of digital micromirror devices[J].Tribology Letters,1997,3(3):239-247.
    [5]

    PATTON S T,ZABINSKI J S.Failure mechanisms of a MEMS actuator in very high vacuum[J].Tribology International,2002,35(6):373-379.
    [6]

    SMALLWOOD S A,EAPEN K C,PATTON S T,et al.Performance results of MEMS coated with a conformal DLC[J].Wear,2006,260(11/12):1179-1189.
    [7]

    PEYRE P,FABBRO R,MERRIEN P,et al.Laser shock processing of aluminum alloys application to high cycle fatigue behavior[J].Materials Science and Engineering,1996,210(1/2):102-113.
    [8]

    FAIRAND B P,CLAUER A H.Use of laser generated shocks to improve the properties of metals and alloys[J].SPIE,1976,86:112-119.
    [9]

    REN N F,YANG J Ch,CAN L.Effects of laser shocking on the mechanical properties of metals[J].Laser Technology,1998,22(4):235-238(in Chinese).
    [10]

    PARKER A.Shocked and stressed,metals get stronger[J].Science Technology Review,2001(3):26-28.
    [11]

    WANG G L,ZHOU J Zh,ZHANG X Q,et al.Application of laser-induced shock wave in surface modification and forming of sheet metal[J].Transactions of the Chinese Society for Agricultural Machinery,2005,36(12):148-152(in Chinese).
    [12]

    FABBRO R,FOURNIER J,BALLARD P,et al.Physical study of laser-produced plasma in confined geometry[J].J A P,1990,68(2):775-782.
    [13]

    ZHANG W W,YAO Y L.Micro scale laser shock processing of metallic components[J].Journal of Manufacturing Science and Engineering,2002,124(2):369-378.
    [14]

    ZHANG W W,YAO Y L.Microscale laser shock processing-modeling testing,and microstructure characterization[J].Journal of Manufacturing Processes,2001,3(2):128-143.
    [15]

    GEERS M G D,BREKELMANS W A M,JANSSEN P J M.Size effects in miniaturized polycrystalline FCC samples:strengthening versus weakening[J].International Journal of Solids and Structures,2006,43(24):7304-7321.
    [16]

    YANG K,DONG P L,LI B Ch.Micro laser shock forming technology[J].Machinery Manufacture,2007,45(12):23-26(in Chinese).
    [17]

    CHEN H Q,YAO Y L,KYSAR J W.Spatially resolved characterization of residual stress induced by micro scale laser shock peening[J].Journal of Manufacturing Science and Engineering,2004,126(2):226-236.
    [18]

    MURR L E.Microstructure-mechanical property relations,shockwave and high-strain-rate phenomena in metals[M].New York:Plenum Press,1981:607-671.
    [19]

    CHEN H Q,WANG Y N,KYSAR J W,et al.Study of anisotropic character induced by microscale laser shock peening on a single crystal aluminum[J].J A P,2007,101(2):024904/1-024904/8.
    [20]

    WANG Y N,KYSAR J W,YAO Y L.Analytical solution of anisotropic plastic deformation induced by micro-scale laser shock peening[J].Mechanics of Materials,2008,40(3):100-114.
    [21]

    ZHANG W W,YAO Y L.Microscale laser shock peening of thin films,part 2:high spatial resolution material characterization[J].Journal of Manufacturing Science and Engineering,2004,126(1):18-24.
    [22]

    AKITA K,TANAKA H,SANO Y,et al.Compressive residual stress evolution process by laser peening[J].Materials Science Forum,2005,490/491:370-375.
    [23]

    CHEN H Q,KYSAR J W,YAO Y L.Characterization of plastic deformation induced by microscale laser shock peening[J].Journal of Applied Mechanics,2004,71(5):713-723.
    [24]

    CHEN H Q,YAO Y L,KYSAR J W,et al.Fourier analysis of X-ray micro-diffraction profiles to characterize laser shock peened metals[J].International Journal of Solids and Structures,2005,42(11/12):3471-3485.
    [25]

    ZHANG W,YAO Y L.Feasibility study of inducing desirable residual stress distribution in laser micromachining[J].Transactions of the North American Manufacturing Research Institution of SME,2001,29:413-420.
  • [1] 姜银方丁报程志军李娟潘禹金华王春辉 . 激光喷丸范围对小孔构件残余应力场的影响. 激光技术, 2014, 38(2): 201-204. doi: 10.7510/jgjs.issn.1001-3806.2014.02.012
    [2] 张明扬朱颖郭伟黄帅侯果 . 激光冲击强化对TC17钛合金高周疲劳性能的影响. 激光技术, 2017, 41(2): 231-234. doi: 10.7510/jgjs.issn.1001-3806.2017.02.017
    [3] 左慧张凯曹旭叶云霞 . 铜箔激光冲击微成形微观组织与残余应力研究. 激光技术, 2018, 42(1): 94-99. doi: 10.7510/jgjs.issn.1001-3806.2018.01.018
    [4] 刘子昂石伟汪诚 . 激光冲击强化残余应力的数值模拟研究. 激光技术, 2017, 41(1): 1-5. doi: 10.7510/jgjs.issn.1001-3806.2017.01.001
    [5] 胡木林谢长生黄开金 . 多道搭接激光熔覆层残余应力测试方法研究. 激光技术, 2006, 30(3): 262-264,270.
    [6] 李兴成张永康周金宇陈菊芳卢雅琳 . 激光冲击强化AZ31镁合金表面残余应力分析. 激光技术, 2016, 40(1): 5-10. doi: 10.7510/jgjs.issn.1001-3806.2016.01.002
    [7] 段成红周俊景裴亚田罗翔鹏 . TC17钛合金单双面激光冲击残余应力分布研究. 激光技术, 2019, 43(2): 161-167. doi: 10.7510/jgjs.issn.1001-3806.2019.02.003
    [8] 龚丞王丽芳朱刚贤宋天麟 . 激光增材制造工艺参量对熔覆层残余应力的影响. 激光技术, 2019, 43(2): 263-268. doi: 10.7510/jgjs.issn.1001-3806.2019.02.021
    [9] 杨兴华汤小东薛茂权 . 激光冲击处理对柴油机曲轴圆角残余应力影响. 激光技术, 2010, 34(5): 596-599. doi: 10.3969/j.issn.1001-3806.2010.O5.006
    [10] 王俊飞袁军堂汪振华章波刘嘉鑫 . 激光选区熔化成形TC4钛合金薄壁件变形与残余应力. 激光技术, 2019, 43(3): 411-416. doi: 10.7510/jgjs.issn.1001-3806.2019.03.023
    [11] 叶鸿伟周建忠黄舒杨小东戴亚春黄娟 . 激光喷丸强化CT试样疲劳裂纹扩展的数值研究. 激光技术, 2010, 34(4): 482-485. doi: 10.3969/j.issn.1001-3806.2010.04.014
    [12] 裴旭任爱国顾永玉许仁军于水生张永康 . AZ91镁合金激光冲击强化力学性能研究. 激光技术, 2010, 34(4): 552-556. doi: 10.3969/j.issn.1001-3806.2010.04.032
    [13] 裴旭吴建华蒋素琴许兆美 . Fe-Ni恒弹合金激光冲击力学性能异化现象研究. 激光技术, 2012, 36(3): 349-352,356.
    [14] 房永祥齐丽君王珂王海林朱长虹朱广志朱晓 . 纯铜表面脉冲激光熔覆Ni60涂层的结构与性能研究. 激光技术, 2017, 41(1): 40-46. doi: 10.7510/jgjs.issn.1001-3806.2017.01.009
    [15] 张建宇高立新崔玲丽王会刚杨久霞 . 激光扫描搭接区内的热循环与应力变化规律分析. 激光技术, 2005, 29(4): 370-372.
    [16] 王强焦俊科王飞亚张文武盛立远 . CFRP与不锈钢激光焊接的有限元分析. 激光技术, 2016, 40(6): 853-859. doi: 10.7510/jgjs.issn.1001-3806.2016.06.017
    [17] 蒋尧姜银方李振余江刘秋阁钱俊康 . 铝合金小孔件单双面激光冲击强化效果研究. 激光技术, 2016, 40(1): 90-93. doi: 10.7510/jgjs.issn.1001-3806.2016.01.020
    [18] 姜银方李娟潘禹蒋尧李振 . 双面激光冲击次序对小孔件强化效果影响研究. 激光技术, 2016, 40(1): 82-85. doi: 10.7510/jgjs.issn.1001-3806.2016.01.018
    [19] 王伟张永康鲁金忠殷苏民 . 基于激光冲击波三维无损打标的数值模拟. 激光技术, 2008, 32(1): 37-39,43.
    [20] 陈菊芳李兴成李仁兴申来娣张永康 . 提高金属抗应力腐蚀开裂的激光喷丸技术. 激光技术, 2011, 35(1): 39-42. doi: 10.3969/j.issn.1001-3806.2011.01.012
  • 加载中
计量
  • 文章访问数:  2010
  • HTML全文浏览量:  6
  • PDF下载量:  1586
  • 被引次数: 0
出版历程
  • 收稿日期:  2009-09-07
  • 录用日期:  2009-11-23
  • 刊出日期:  2010-09-25

MEMS金属微构件的激光微喷丸强化技术分析与展望

    通讯作者: 周建忠, zhoujz@ujs.edu.cn
    作者简介: 樊玉杰(1979- ),女,博士研究生,主要从事激光冲击方面的研究.
  • 1. 江苏大学, 机械工程学院, 镇江, 212013
基金项目:  教育部博士点基金资助项目(200802990004);江苏省高校自然科学基金重大项目基金资助项目(08KJA460002);江苏省自然科学基金资助项目(BK2009219);江苏大学校科研项目基金资助项目(CX08B_06x)

摘要: 介绍了适用于金属微构件处理的激光微喷丸技术,通过控制工艺参量和合理的路径规划,在试件表面产生有益的残余压应力分布,能有效提高工件的抗疲劳和磨损性能。概述了微喷丸技术的研究现状,总结了激光微喷丸的机理、关键技术和影响因素,分析了激光微喷丸研究中存在的问题,为今后激光微喷丸技术的进一步研究提供指导。

English Abstract

参考文献 (25)

目录

    /

    返回文章
    返回