[1] ZHANG H W. The principle and technology of modern printed circuit technology[M]. Beijing: China Machine Press, 2012:10-16(in Chinese).
[2] HIROGAKI T, AOYAMA E, INOUE H, et al. Laser drilling of blind via holes in aramid and glass/epoxy composites for multi-layer printed wiring boards[J]. Applied Science and Manufacturing, 2001, 32(7): 963-968.
[3] WANG X C, LI Z L, CHEN T, et al. 355nm DPSS UV laser cutting of FR4 and BT/epoxy-based PCB substrates[J].Optics and Lasers in Engineering, 2008, 46(5): 404-409.
[4] YU X F, HE W, WANG Sh X, et al. Research on blind via drilling using UV laser[J]. Printed Circuit Information, 2011(4): 62-66(in Chinese).
[5] ZHANG F, ZENG X Y, LI X Y, et al. Laser etching and cutting printed circuit board by 355nm and 1064nm diode pumped solid state lasers[J].Chinese Journal of Lasers, 2008, 35(10): 1637-1643 (in Chinese).
[6] NOWAK M R, ANTON?ZAK A J, KOZIO? P E, et al. Laser prototyping of printed circuit boards [J]. Opto-Electronics Review, 2013, 21(3): 320-325.
[7] ZHANG F, DUAN J,ZENG X Y, et al. Study of blind holes drilling on flexible circuit board using 355nm UV laser[J]. Chinese Journal of Lasers, 2009, 36(12):3143-3148(in Chinese).
[8] YAN M Q, ZHU H H, CHEN Z H. Laser microvia process of printed circuit board [J]. Optics Optoelectronic Technology, 2007, 5(3): 37-40(in Chinese).
[9] CAO Y, LI X Y, CAI Zh X, et al. Research progress of laser micro processing in integrated circuits manufacturing[J]. Optics Optoelectronic Technology, 2006, 4(4): 25-28(in Chinese).
[10] MOORHOUSE C J, VILLARREAL F, WENDLAND J J, et al. Enhanced peak power CO2 laser processing of PCB materials [J]. Photonic Engineering, 2005, 5827(44): 438-445.
[11] YUNG K C, MEI S M, YUE T M. A study of the heat affected zone in the UV YAG laser drilling of GFRP materials[J]. Journal of Materials Processing Technology, 2002,122(2/3): 278-285.
[12] KONG R Z, LIU J Ch, WU Y F, et al. Positioning study in laser corrosion hemisphere platinum resistors[J]. Laser Technology, 2014, 38(3):321-324(in Chinese).
[13] KONG L R, ZHANG F, DUAN J, et al. Research on water-assisted laser etching of alumina ceramics[J]. Laser Technology, 2014, 38(3):330-334(in Chinese).
[14] RYTLEWSKI P, MRZ W,?ENKIEWICZ M, et al. Laser induced surface modification of polylactide[J]. Journal of Materials Processing Technology, 2012, 212(8): 1700-1704.