[1] LU K,LU J. Surface nanocrystallization of metallic materials presentation of the concept behind a new approach [J]. Journal of Material Science Technology, 1999,15(3):193-197.
[2] XU B Sh, OU W Zh, MA Sh N, et al. Nano-materials surface engineering[J]. China Mechanical Engineering, 2000,11(6):707-712(in Chinese).
[3] XU B Sh, LIU Sh C, LIANG X B. Progress and prospect of nano-materials surface engineering[J].Chinese Jornal of Mechanical Engineering,2003,10(10):21-26(in Chinese).
[4] LIU G,YONG X P,LU K. The current situation of researches of surface-nanocrystallization on metallic materials[J].China Surface Engineering,2001,52(3):1-5(in Chinese).
[5] LU K, LU J. Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment[J]. Material Science and Engineering,2004,A38(7):375-377.
[6] LIU G, ZHOU L. Surface nanocrystallization technique of the engineering metallic material[J].Nanoscience Technology, 2006,3 (1): 51-56(in Chinese).
[7] WEN H Y. Study of the laser surface treatment of Inconel718 alloy. Qinhuangdao:Yanshan University,2010:39-40(in Chinese).
[8] KANNATEY-ASIBU E.Principles of laser materials processing [M].Hoboken, NJ,USA: Wiley,2009:594-595.
[9] WANG Ch T, ZHOU H, LIN P Y, et al. Fabrication of nano-sized grains by pulsed laser surface melting[J]. Journal of Physics,2010,D43(9):095402.
[10] ZHANG P, ZHOU H, WANG Ch T, et al. Wear properties of H13 with micron scale and nano scale grains bionic units processed by laser remelting [J].Optics Laser Technology,2013,54:219-224.
[11] CHEN S Y,DONG J, CHEN J, et al. Nano-particles reinforced Co-based gradient coating with high wear-resistance prepared in-situ by laser on surface of crystallizer copper alloy[J].Chinese Journal of Lasers,2011,38(7):0703006(in Chinese).
[12] NIU X, CHAO M J, WANG W L, et al. In situ synthesized NbC particulate reinforced Ni- based composite coatings by laser cladding[J].Chinese Journal of Lasers,2006,33(7):987-992(in Chinese).
[13] XU J, LI Z Y, ZHU W H, et al.Investigation on microstructural characterization of in situ TiB/Al metal matrix composite by laser cladding [J]. Materials Science and Engineering,2007,A447(1/2):307-313.
[14] LI J NG,GONG Sh L, LIU HAO, et al. Physical properties and microstructures of Fe3Al matrix laser amorphous-nanocrystals reinforced coating[J].Materials Letters,2013,92:235-238.
[15] ZHANG G J,DAI J Q,WANG H P, et al. Research on laser cladded nickel based nanometer tungsten carbide composite coatings[J]. Transactions of Materials and Heat Treatment, 2004, 25(5) : 1004-1008.
[16] WANG H P, ZHANG G J, DAI J Q, et al. The structure of wcnano/Ni composite coating by laser cladding[J].Applied Laser,2005,25(6):369- 394.
[17] MONTROSS C S, WEI T, YE L, et al. Laser shock processing and its effects on microstructure and properties of metal alloys: a review [J]. International Journal of Fatigue,2002,24(10):1021-1036.
[18] NIE X F, HE W F, LI Q P, et al. Improvement of structure and mechanical properties of TC6 titanium alloy with laser shock peening[J].High Power Laser and Partical Beams,2013,25(5):1115-1119(in Chinese).
[19] LU J Z. Investigation of laser shock processing on the mechanical properties and micro-plastic deformation mechanism of LY2 aluminum alloy.Zhenjiang: Jiangsu University, 2010:64-72(in Chinese).
[20] XIONG Ch, LI Zh F, WANG X D. Thermal stability of microstructure of laser shock processed TC11 titanium alloy[J].Jouranl of Plasticity Engineering,2013,20(3):116-120(in Chinese).