[1] SHI H L, LI J Q, JIA Zh X, et al. Microstructure and properties of SKD61 die steel strengthened by biomimetic laser-remelting[J]. Material for Mechanical Engineering, 2014,38(8):39-43(in Chin-ese).
[2] SALAS O, KEAMS K, CARRERA S, et al. Tribological behavior of candidate coatings for Al die casting dies[J]. Surface Coatings Technology,2003,172(2/3):117-127.
[3] ZHANG Ch H, LI Ch Y, ZHANG S, et al. Microstructure and property of laser surface melt-solidifying for H13 die steel[J]. Heat Treatment of Metals,2004,29(10):14-17(in Chinese).
[4] LIANG H, MA F R, ZHANG T H, et al. Surface structure and corrosion properties of binary Ti-C and Mo-C coatings Co-deposited by filtered vacuum arc plasma deposition system[J]. Surface Coatings Technology,2000,131(1/3):58-61.
[5] DENG M, WANG Y Q, GU Y, et al. Microstructure and wear behavior of laser hardened gray cast Iron guideway[J]. Chinese Journal of Lasers,2014,41(4):0403009(in Chinese).
[6] LIU L J, JIANG Y Q, DI T N, et al. HHT analysis of acoustic signal characteristics caused by defocusing amount fluctuation on laser strengthened mould surface[J]. Transactions of the China Welding Institution, 2013, 34(9):51-54(in Chinese).
[7] ZHANG M. The geometric error detection and distinguishing of laser interferometer based NC machine tool[J]. Mechanical Engineer,2006(9):76-78(in Chinese).
[8] ZHU J, LI X F, TAN W B, et al. Method of geometric error detection for measuring machine based on laser interferometer[J]. Journal of Mechanical Engineering,2010,46(10):25-30(in Chinese).
[9] LI R G. Calibration of tool spindle for 5-axis CNC machine using laser tracker[J]. Optics and Precision Engineering, 2012, 20(3):477-483(in Chinese).
[10] LIU Y Q, CAO Y H, PAN F, et al. Beam transformation of diode lasers used in laser processing[J]. Optics and Precision Engineering,2012,20(3):455-461(in Chinese).
[11] GAO P D, ZHANG F Q. Design and implementation of high precision temperature control system for semiconductor lasers[J]. Laser Technology,2014,38(2):270-273(in Chinese).
[12] SONG W X, ZHANG J Q, LIU X L. Development of post processing for five-axis CNC machine tools based on UG NX[J]. Manufacturing Technology Machine Tool, 2013(12):147-150(in Chinese).
[13] SHEN N Y, YU Zh X, LI J. Realization of the postprocessor of intelligent turning-milling combined machining cell based on UG NX[C]//4th International Conference on Manufacturing Science and Engineering.Geneva, Swiss:Advanced Material Research Society, 2013:2303-2307.
[14] TANG Q Ch, HE J, GAO L L, et al. The research of nonlinearity error control on five-axis machining post processor[C]//International Conference on Advance Design and Manufacturing Engineering. Geneva, Swiss:Advanced Material Research Society, 2011:2353-2357.
[15] GAO J, CHEN Y P, DENG H X, et al. In-situ inspection error compensation for machining accuracy improvement of complex components[J]. Journal of Mechanical Engineering,2013,49(19):133-142(in Chinese).
[16] LIU Y, XIE F, LIU J, et al. The NC machining post-processing technology based on UG[C]//3rd International Conference on Advance Engineering Material and Technology. Geneva, Swiss:Advanced Material Research Society,2013:1254-1257.