[1] XU B S. The theory and technology for equipment remanufacturing engineering[M]. Beijing:National Defense Industry Press, 2007:12-16(in Chinese).
[2] CAI L F, ZHANG Y Z, SHI L K. Microstructure and formation mechanism of titanium matrix composites coating on Ti-6Al-4V by laser cladding[J]. Rare Metal Materials and Engineering, 2007, 26(4):342-346.
[3] ZHANG W P, LIU W Y. Progress of laser cladding about ceramic coating[J]. Surface Technology, 2011, 30(8):30-33(in Chinese).
[4] CHEN H H, XU C Y, CHEN J, et al. Microstructure and phase transformation of WC/Ni60B laser cladding coating during dry sliding wear[J].Wear, 2008, 26(4):487-493.
[5] YU J. The study of monitoring and controlling dimensions of deposition layers in the laser rapid forming process[D].Xi'an:Northwestern Polytechnical University,2007:42-46(in Chinese).
[6] ZHANG K, LIU W, SHANG X F, et al. Development of research on directly rapid prototyping of metal materials and components by multi-layer cladding[J].Laser Journal, 2005, 26(4):4-8(in Chinese).
[7] ZHONG M L, NING G Q, LIU W J. Research and development on laser direct manufacturing metallic components[J]. Laser Technology, 2002, 26(5):388-391(in Chinese).
[8] NING G Q, ZHONG M L, YANG L. Research about close-loop control system during laser direct manufacturing metallic components[J]. Applied Laser, 2002, 22(2):172-176(in Chinese).
[9] PENG D F, WANG Y Q, LI B. Real-time power measurement and control system of high power CO2 lasers[J]. Laser Technology, 2006, 30(5):483-485(in Chinese).
[10] TAN H, CHEN J, YANG H O, et al. Real-time sensing and closed-loop control of laser rapid forming process[J]. Applied Laser, 2005, 25(2):73-76(in Chinese).
[11] LINK G R. Rapid tooling die case inserts using shape deposition manufacturing[J]. Materials and Manufacturing Processing,1998,13(2):263-274.
[12] HU Y P. An analysis of powder feeding systems on the quality of laser cladding[J].Advances in Powder Metallurgy Particulate Materials, 1997, 21(7):17-31.
[13] LI L. In process laser power monitoring and feedback control for stable production of full-penetration weld in continuous wave fibre laser welding[J]. Journal of Physics, 2009, D42(8):36-45.
[14] HERALIC' A, CHRISTIANSSON A K, OTTOSSON M, et al. Increased stability in laser metal wire deposition through feedback from optical measurements[J].Optics and Lasers in Engineering, 2010, 48(4):478-485.
[15] BOUHAL M A. Tracking control and trajectory planning in layered manufacturing applications[J]. IEEE Transaction on Industrial Electronics, 1999, 46(2):445-451.
[16] FANG T, JAFARI M A. Statistical feedback control architecture for layered manufacturing[J]. Journal of Materials Processing and Ma-nufacturing Science, 1999, 37(7):391-404.
[17] DOUMANIDIS C, SKOREDLI E. Distributed parameter modeling for geometry control of manufacturing processes with material deposition[J]. ASME Journal of Dynamic Systems, Measurement and Control, 2000, 122(1):71-77.
[18] RADOVAN K, SYED H, YILDIRIM H, et al. Thermo-kineticand-structural modeling and experimental investigations of laser power deposition process[D].Dallas,Texas,USA:Lyle School of Engineering Southern Methodist University, 2009:56-60.
[19] CHEN W Zh, JIA L, ZHANG X D, et al. Coaxial vision sensing system and detection of penetration status in CO2 laser welding[J].Applied Laser, 2004, 24(3):130-134(in Chinese).
[20] LEI J B, YANG X C,CHEN J, et al. Study on measurement of temperature field in laser molten pool[J]. Journal Huazhong University of Science and Technology(Nature Science Edition), 2007, 35(1):112-114(in Chinese).
[21] MENG X X. Study on the process of fiber laser welding based on the technology of high-speed camera[D]. Wuhan:Huazhong University of Science and Technology, 2011:25-27(in Chinese).
[22] MAZUMDER J, DUTTA D, KIKUCHI N, et al. Closed loop direct metal deposition:art to part[J]. Optics and Lasers in Engineering, 2000, 34(4/6):397-414.
[23] ZHANG Y, YAO J H, HU X D, et al. Design of measurement system of powder flow in laser remanufacturing technology[J].Laser Technology, 2009, 33(6):568-570(in Chinese).
[24] XIA R B, LIU W J, WANG Y C. Factors affecting precision during laser direct manufacturing metallic components and advances in research about their closed-loop control system[J]. Mechanical Science and Technology, 2004, 23(9):1085-1089(in Chinese).