| [1] | BRANDL E, HECKENBERGER U, HOLZINGER V, et al. Additive manufactured AlSi10Mg samples using selective laser melting (SLM):Microstructure, high cycle fatigue, and fracture behavior[J]. Materials Design, 2012, 34:159-169. |
| [2] | HOLLANDER D A, WIRTZ T, WALTER V M, et al. Development of individual three-dimensional bone substitutes using selective laser melting[J]. European Journal of Trauma, 2003, 29(4):228-234. |
| [3] | CHEN G X, WANG Z M, GUAN K, et al. Effects of parameters on surface roughness of samples by selective laser melting[J].Technology and Test, 2009(12):86-89(in Chinese). |
| [4] | KONG W D, WANG Sh F, WANG D,et al. Preliminary study on direct manufacturing of customized lingual brackets by selective laser melting[J].Laser Technology, 2012,36(3):301-306(in Chinese). |
| [5] | VANDENBROUCKE B, KRUTH J P. Selective laser melting of biocompatible metals for rapid manufacturing of medical parts[J]. Rapid Prototyping Journal, 2007, 13(4):196-203. |
| [6] | WANG Q G, APELIAN D, LADOS D A. Fatigue behavior of A356-T6 aluminum cast alloys. Part 1.Effect of casting defects[J]. Journal of Light Metals, 2001,1(1):73-84. |
| [7] | EJIOFOR J U, REDDY R G. Developments in the processing and properties of particulate Al-Si composites[J]. Journal of the Minerals, 1997, 49(11):31-37. |
| [8] | SERCOMBE T B, SCHAFFER G B. Rapid manufacturing of aluminum components[J]. Science, 2003, 301(29):1225-1227. |
| [9] | ZHANG Sh, GUI R Zh, WEI Q S, et al. Cracking behavior and formation mechanism of TC4 alloy formed by selective laser melting[J]. Journal of Mechanical Engineering, 2013, 49(23):21-27(in Chinese). |
| [10] | XI M Zh, GAO Sh Y. Microstructures and mechanism of cracks forming of Rene 80 high-temperature alloy fabricated by laser rapid forming process[J]. Chinese Journal of Lasers, 2012, 39(8):91-96(in Chinese). |
| [11] | WANG X J. Process parameters and properties of selective laser melting Al-Si alloys[D]. Beijing:China University of Geosciences (Beijing), 2014:109-111(in Chinese). |
| [12] | TAO G L. Numerical simulation in the temperature field and thermal stress field of large specification 7050 aluminum alloy billets during solidification process[D]. Chongqing:Chongqing University, 2007:39-51(in Chinese). |
| [13] | LI H. Solidification crack criterion research on aluminum alloy laser welding[D].Wuhan:Huazhong University of Science and Technology, 2009:21-27(in Chinese). |
| [14] | FANG K. Control of welding cold crack with trailing electromagnetic induction heating during welding[D]. Harbin:Harbin Institute of Technology, 2010:33-43(in Chinese). |
| [15] | MERCELIS P, KRUTH J P. Residual stresses in selective laser sintering and selective laser melting[J]. Rapid Prototyping Journal, 2006, 12(5):254-265. |
| [16] | KRUTH J P, FROYEN L, VAERENBERGH J V, et al.Selective laser melting of iron-based powder[J]. Journal of Materials Processing Technology, 2004, 149(1/3):616-622. |