[1] SHI Y Sh,LIU J H,YAN Ch Z,et al.Powder material selective laser rapid prototyping technology and its application[M].Beijing:Science Press,2012:37-39(in Chinese).
[2] SUN Sh W,ZHANG J,ZHENG H Zh.The precision research of PS parts based on SLS[J].Modern Plastics Processing and Applications,2007,19(1):26-28(in Chinese).
[3] DU Y Y,SHI Y Sh,WEI Q S.Technology and simulation of cold isostatic pressing of selective laser sintered parts[J].Laser Technology,2014,38(1):96-100(in Chinese).
[4] LI D Ch,TIAN X Y,WANG Y X,et al.Development of additive manufacturing technology[J].ElectromachiningMould,2012,32(s1):20-22(in Chinese).
[5] DONG Q,WANG Ch Y,QIAN Q B.The research of the influential factors on polystyrene parts size accuracy base on Selective laser sintering[J].Plastics Industry,2010,38(4):93-95(in Chinese).
[6] YANG L X,HONG H X,YAO X S,et al.Experimental study on sucrose of selective laser sintering[J].Laser Technology,2015,39(1):114-118(in Chinese).
[7] YAO X Sh.Study on the laser sintering process of carbohydrate-based material[D].Xi'an:Xi'an University of Science and Technology,2014:17-20(in Chinese).
[8] REN N F,LUO Y,XU M L.Effect of laser energy density on the dimension12/HDPE product[J].Laser Technology,2010,34(4):561-564(in Chinese).
[9] XIE X L,XIAO H P.The research of reduce sintering shrinkage on polystyrene powder[J].Journal of Nanchang Institute of Aviation Industry (Natural Science Edition),2004,18(3):69-71(in Chinese).
[10] ZHANG J,XU Zh F,ZHENG H Zh,et al.Study on the selective laser sintering process of polystyrene/Al2O3 nano-composites[J].Mechanical Science and Technology,2006,25(1):15-17(in Chinese).
[11] DECKERS J,SHAHZAD K,VLEUGELS J,et al.Isostatic pressing assisted indirect selective laser sintering of alumia components[J].Rapid Prototyping Journal,2012,18(5):409-419.
[12] RATNDEEP P,SAM A.Process energy analysis and optimization in selective laser sintering[J].Journal of Manufacturing Systems,2012,31(4):429-437.
[13] WANG Ch Y,CHEN Y.The coupling research of selective laser sintering polystyrene'process parameters[J].Applied Laser,2014,34(4):305-309(in Chinese).
[14] YAN C Z,SHI Y S,YANG J S,et al.Preparation and selective laser sintering of nylon-coated metal powder for the indirect SLS process[J].Rapid Prototyping Journal,2009,15(5):355-360.
[15] ZHU P L,XU Zh F,YU H,et al. Effects of process parameters on the forming of coated sand by selective laser sintering[J].Journal of Nanchang Hangkong University (Natural Sciences Edition),2012,26(1):104-108(in Chinese).