[1] KANG R K,YUAN J T,SHI X K,et al. Study on laser dressing of superabrasive grinding[J].China Mechanical Engineering,2000,11(5):493-496(in Chinese).
[2] WESETKAMPER E. Grinding assisted by Nd:YAG laser[J]. CIRP Annals-Manufacturing Technology,1995,44(1):317-320.
[3] ZHANG C H, SHIN Y C. Wear of diamond dresser in laser assisted truing and dressing of vitrified CBN wheels[J]. International Journal of Machine Tools Manufacture,2003,43(1):41-49.
[4] CHEN G Y, CHEN Ch, BU Ch, et al. Laser online bronze diamond grinding wheel finishing numerical simulation and experiment[J]. Laser Technology,2012,36(4):433-437(in Chinese).
[5] ZUO D W, KAWANO Y. Effect of CO2 pulsed laser scaning on diamond wheel pleces[J]. Chinese Journal of Mechanical Engineering,1999, 35(2):42-45(in Chinese).
[6] CHEN G Y,LI Z G,DENG H,et al. The experimental studies of dressing of bronze-bonded diamond grinding wheels using a pulsed fiber laser[J]. Laser Technology, 2013,37(6):705-711(in Chinese).
[7] CHEN G Y, CHEN G G, HUANG K,et al. Study on the accuracy for laser truing and dressing of bronze-bonder diamond wheels[J]. Chinese Journal of Lasers,2009,36(5):1278-1281(in Chinese).
[8] WANG X Y,WU Y B,WANG J,et al. CBN wheel cylinder angle of incidence of the effect of laser trimming[J]. Journal of Dalian University of Technology, 2005,45(5):672-675(in Chinese).
[9] WANG Y,HU D J, DENG Q L,et al. Analysis of temperature field for laser assisted mechanical dressing and truing of diamond grinding wheel[J]. Chinese Journal of Lasers, 2005, 32(3):431-435(in Chinese).
[10] CHEN G Y, ZHU D J, PENG K, et al. Experiment and evaluation of laser dressing diamond wheels dressing by pulsed laser[J]. Chinese Journal of Lasers,2007,34(4):245-249(in Chinese).
[11] PAHK H J, STOUT K, BLUNT L. A comparative study on the three-dimensional surface topography for the polished surface of femoral head[J]. The International Journal of Advanced Manufacturing Technology,2000,16(8):564-570.
[12] WANG X J, WANG J, WANG L. Laser triangulation method were reviewed[J]. Chinese Journal of Scientific Instrument, 2004,25(4):601-608(in Chinese).
[13] LU J R,HUANG Y Q. Laser triangulation measuring surface topography[J]. Journal of Xiamen University, 2004,43(1):50-53(in Chinese).
[14] FENG G Y,SHI L S,YUE Z P. A new type of process control method based on LabVIEW and implementation[J]. Journal of Electronic Measurement and Instrument,2007,21(4):77-81(in Chinese).
[15] TIAN J M,GONG C L,JI L H,et al. Car wheel speed sensor measurement and control system design based on LabVIEW[J]. Instrument Technique and Sensor,2010(6):21-24(in Chinese).