[1] YANG Y Q, WANG D, YANG B, et al. Research situation and application prospect of the laser scanner welding[J]. Mechanical Electrical Engineering Technology, 2010, 39(9):13-17(in Chinese).
[2] UM J Y, STROUD I A. Total energy estimation model for remote laser welding process[J]. Procedia CIRP,2013, 7:658-663.
[3] BRUNREUTHER S, HAMMERSTINGL V, SCHWEIER M, et al. Welding joint detection by calibrated mosaicking with laser scanner systems[J]. CIRP Journal of Manufacturing Science and Technology,2015, 10:16-23.
[4] NAGESHA I, KWABENAB A K.Sliding mode observers for plasma signal identification in remote laser welding[J]. IFAC-Papers on Line, 2015, 48(3):1924-1929.
[5] CEGLAREK D, COLLEDANI M,VNCZA J,et al. Rapid deployment of remote laser welding processes in automotive assembly systems[J]. Annals-Manufacturing Technology of the CIRP,2015, 64(1):389-394.
[6] BLEY H, WEYAND L, LUFT A. An alternative approach for the cost-efficient laser welding of zinc-coated sheet metal[J]. Annals-Manufacturing Technology of the CIRP,2007,56(1):17-20.
[7] GRAHAM M G, HIRAK D M, KERR H W, et al. Nd:YAG laser welding of coated sheets steel[J]. Journal of Laser Application,1994, 6(4):212-222.
[8] HUANG H J, XI Sh Y, DING J J. The research on laser welding processes of zinc-coated steel of car body for improving the influence of zinking layer[J]. Applied Laser,2005, 25(5):306-308(in Chinese).
[9] XIE J,DENNE P. Galvanized steel joined with lasers[J]. Welding Journal,2001,80(6):59-61.
[10] COLOMBON D, COLOSIMO B M, PREVITALI B. Comparison of methods for data analysis in the remote monitoring of remote laser welding[J].Optics and Lasers in Engineering,2013,51(1):34-46.
[11] ERDOS G, KEMNY Z, KOVCS A, et al. Planning of remote laser welding processes[J]. Procedia CIRP, 2013,7:222-227.
[12] ROOS C, SCHMIDT M. Remote laser welding of zinc coated steel sheets in an edge lap configuration with zero gap[J].Physics Procedia,2014, 56:535-544.
[13] KIM C H, CHOL W H, PARK K Y. Application of laser remote welding to an aluminum automotive part[J]. Materials Science Forum, 2010,654/656:966-969.
[14] STANDARDIZATION ADMINISTRATION OF THE PEOPLE'S REPUBLIC OF CHINA. Electron and laser beam welded joints-guidance on quality levels for imperfactions-Part 1:Steel[S]. Beijing:China Standard Press, 2009:1(in Chinese).