[1] HEINE A, HASZLER A, KEIDEL C, et al. Development in aluminum alloy for aerorspace application[J]. Materials Science and Engineering, 2000, A280(2000):102-107.
[2] ZHOU W Sh. The welding of aluminium and aluminium alloy[M]. Beijing:Mechanical Industry Press, 2006:3-4(in Chinese).
[3] ZHAO T W, JIANG Y Y. Fatigue of 7075-T651 aluminum alloy[J]. International Journal of Fatigue, 2008, 30(5):834-849. doi: 10.1016/j.ijfatigue.2007.07.005
[4] ZHAI Y F, HUANG J, LI M, et al. Research on high speed high power CO2 laser welding of 6061-T6 aluminum with filler wire[J]. Chinese Journal of Lasers, 2011, 38(5):85-90(in Chinese).
[5] LAHTI K. One+one is more than two[J]. Svetsaren(English Edition), 2003, 8(2):22-24.
[6] SONG X H, JIN X Zh, CHEN SH Q, et al. Progress of laser-arc hybrid welding and its applications in automotive body manufacture[J]. Laser Technology, 2015, 39(2):259-265(in Chinese).
[7] YAO Y Sh, WANG Y Y, LI X Y. Review on laser hybrid welding technology[J]. Hot Working Technology, 2014, 43(9):16-20(in Chinese).
[8] LI Y X. Study on technology of laser-arc hybrid welding for structural steel plates[D].Changchun: Jilin University, 2013: 9-23(in Chinese).
[9] ZHAO Y B, LEI Zh L, MIAO Y G, et al. Welding characteristics of laser-arc double-sided welding for aluminum alloy[J]. Chinese Journal of Lasers, 2011, 38(6):117-123(in Chinese).
[10] YANG J, LI X Y, GONG Sh L, et al. Characteristics of aluminium-lithium ally joint formed by YAG-MIG hybrid welding[J]. Transactions of the China Welding Institution, 2010, 31(2):83-86(in Chinese).
[11] ZHOU Y F. Study on fiber laser-MIG Arc hybrid welding of 5A06 aluminum alloy[D]. Changsha: Hunan University, 2016: 5-22(in Chinese).
[12] GU L. A study on laser-arc hybrid welding for aluminum alloy and numerical simulation for the temperature field[D]. Wuhan: Huazhong University of Science and Technology, 2006: 28-43(in Chinese).
[13] YUE H J, ZHAO H Y, CAI Zh P, et al. Welding residual stress and distortion simulation of thin aluminum structures[J]. Journal of Mechanical Engineering, 2005, 41(2):223-227(in Chinese). doi: 10.3901/JME.2005.02.223
[14] ZHANG J, CAI Y. Influence of side-blow assist gas nozzle position on plasma dimensions characteristic[J]. Hot Working Technology, 2012, 41(3):104-107(in Chinese).
[15] ANCONA A, SIBILLANO T, TRICARICO L, et al. Comparison of two different nozzles for laser beam welding of AA5083 aluminium alloy[J]. Journal of Materials Processing Technology, 2005, 164(1), 971-977.
[16] ZHANG L J, ZHANG J X, DUAN A Q. Effect of side gas on laser induced plasma during laser deep penetration welding[J]. Transactions of the China Welding Institution, 2006, 27(10):37-40(in Chinese).
[17] ZHANG N, SHENG H C, YAO H Zh. Validation of numerical simulation on resistance and flow field of submarine and numerical optimization of submarine hull form[J].Journal of Ship Mechanics, 2005, 9(1):1-12(in Chinese).
[18] CHEN Q G, XU Zh, ZHANG Y J. Numerical simulation of a semi-confined slot turbulent impinging jet[J]. Chinese Journal of Applied Mechanics, 2003, 20(2):88-91(in Chinese).
[19] CHEN Q G, XU Zh, ZHANG Y J. Numerical simulation of turbulent impinging jet flow using a modified renormalization group model[J]. Journal of Xi'an Jiaotong University, 2002, 36(9):916-920(in Chinese).
[20] ZHANG Zh Sh, CUI G X. Fluid mechanics[M]. Beijing:Tsinghua University Press, 2015:20-85(in Chinese).
[21] WANG B, SONG Y L. The phenomenon of welding arc and weld material manufacturability[M]. Beijing:Mechanical Industry Publishing House, 2012:13-90(in Chinese).