[1] YANG D, YU Y, ZHAO X, et al. Fabrication of silicon carbide (SiC) coatings from pyrolysis of polycarbosilane/aluminum[J]. Journal of Inorganic and Organometallic Polymers and Materials, 2011, 21(3):534. doi: 10.1007/s10904-011-9481-y
[2] WANG Ch, ZHU D M, ZHOU W C, et al. Research progress in ceramic matrix composites fabrication via filler-assisted precursor infiltration and pyrolysis method[J]. Materials Review, 2014, 28(17):145-150(in Chinese).
[3] XIAO P, YANG D X, ZHAO X, et al. Novel chemical method to fabricate SiC/Al2O3 ceramic composite coatings on metallic substrates[J]. China Surface Engineering, 2009, 22(6):24-29(in Chinese).
[4] WANG K, UNGER J, TORREY J D, et al. Corrosion resistant polymer derived ceramic composite environmental barrier coatings[J]. Journal of the European Ceramic Society, 2014, 34(15):3597-3606. doi: 10.1016/j.jeurceramsoc.2014.05.036
[5] SEO D, JUNG S, LOMBARDO S J, et al. Fabrication and electrical properties of polymer-derived ceramic (PDC) thin films for high-temperature heat flux sensors[J]. Sensors & Actuators, 2011, A165(2):250-255.
[6] BARROSO G S, KRENKEL W, MOTZ G. Low thermal conductivity coating system for application up to 1000℃ by simple PDC processing with active and passive fillers[J]. Journal of the European Ceramic Society, 2015, 35(12):3339-3348. doi: 10.1016/j.jeurceramsoc.2015.02.006
[7] YUAN J, LUAN X, RIEDEL R, et al. Preparation and hydrothermal corrosion behavior of Cf/SiCN and Cf/SiHfBCN ceramic matrix composites[J]. Journal of the European Ceramic Society, 2015, 35(12):3329-3337. doi: 10.1016/j.jeurceramsoc.2014.12.009
[8] GOERKE O, FEIKE E, SCHUBERT H. High temperature ceramic matrix composites[M]. Weinheim, Germany:Wiley-VCH Verlag GmbH & Co KGaA, 2006:236-239.
[9] QIAO Y L, XUE Y Ch, LIU J, et al. Prolytic ceramization of polymer precursors on metallic surfaces:perspect and prospect[J]. Materials Review, 2016, 30(6):1-6(in Chinese).
[10] ERNY T, SEIBOLD M, JARCHOW O, et al. Microstructure development of oxycarbide composites during active-filler-controlled polymer pyrolysis[J]. Journal of the American Ceramic Society, 2010, 76(1):207-213.
[11] CAO Sh W, XIE Zh F, WANG J, et al. Research progress in hetero-elements containing SiC ceramic precursors[J]. Polymer Materials Science & Engineering, 2007, 23(3):1-5(in Chinese).
[12] MULLER A, GERSTEL P, BUTCHEREIT E, et al. Si/B/C/N/Al precursor-derived ceramics:synthesis, high temperature behaviour and oxidation resistance[J]. Journal of the European Ceramic Society, 2004, 24(12):3409-3417. doi: 10.1016/j.jeurceramsoc.2003.10.018
[13] MOTZ G, HACKER J, ZIEGLER G. Special modified silazanes for coatings, fibers and CMC'S[J]. Ceramic Engineering & Science Proceedings, 2008, 21(4):307-314.
[14] XUE Y Ch, QIAO Y L, LIU J, et al. SiOC ceramic coating prepared by laser pyrolysis liquid polydimethylsiloxane[J]. Journal of the Chinese Ceramic Society, 2016, 44(10):1482-1487(in Ch-inese).
[15] FRIEDELA T, TRAVITZKYA N, NIEBLINGB F, et al. Fabrication of polymer derived ceramic parts by selective laser curing[J]. Journal of the European Ceramic Society, 2005, 25(2):193-197.
[16] PROUST V, BECHELANY M C, GHISLENI R, et al. Polymer-derived Si-C-Ti systems:from titanium nanoparticle-filled polycarbosilanes to dense monolithic multi-phase components with high hardness[J]. Journal of the European Ceramic Society, 2016, 36(15):3671-3679. doi: 10.1016/j.jeurceramsoc.2016.04.023