[1] XIE H B, GONG R M, HAN L, et al. Optical system design of a portable laser Doppler velocimeter[J]. Laser Technology, 2011, 35(1):109-111(in Chinese).
[2] CHEN J J, LI L F. Investigation on the slow-light characteristics of nonlinear Bragg gratings based on optical power control[J]. Laser Technology, 2015, 39(2):224-227(in Chinese).
[3] ZHOU K J, ZHU J L, WEI B, et al. Research of multi-section Lyot fiber depolarizer[J]. Laser Technology, 2015, 39(6):741-744(in Chinese).
[4] DIAO L, WANG W L, KONG Y, et al. Influence of temperature on output polarization degree of fiber Lyot depolarizers[J]. Laser Technology, 2015, 39(2):220-223(in Chinese).
[5] XU H J, ZHANG Q, ZHANG Sh. Polarization dependence of polarization-maintaining fiber couplers based on intensity transmission matrix[J]. Laser Technology, 2013, 37(2):235-238(in Chinese).
[6] CHEN D F, LU P, LIU D M. Highly sensitive curvature sensors based on polarization-maintaining photonic crystal fibers[J]. Laser Technology, 2015, 39(4):450-452(in Chinese).
[7] XU W, JIN T, CHI H. Theoretical and experimental research of coupled optoelectronic oscillators[J]. Laser Technology, 2014, 38(5):579-585(in Chinese).
[8] WEI X Ch, OU P, ZHANG Ch X, et al. Study on single-frequency single-polarization narrow-linewidth fiber laser and its amplification[J]. Laser Technology, 2010, 34(1):5-7(in Chinese).
[9] OU P, XU H J, YANG D W, et al. Measurement of high-birefringent polarization-maintaining fiber and its analysis with Mueller matrix[J]. Laser Technology, 2009, 33(1):15-17(in Chinese).
[10] NING T G, TONG Zh, PEI L, et al. Experimental study about the modulation of fiber lasers[J]. Laser Technology, 2008, 32(1):77-79(in Chinese).
[11] WANG G, LI K, KONG F M.Study of characteristics of polarization mode dispersion in single mode fibers with elliptical birefringence[J]. Laser Technology, 2006, 30(5):465-468(in Chinese).
[12] XU L, YAO Sh Q.Effects of temperature on the performance of twisted optic fiber loop[J]. Laser Technology, 2005, 29(1):52-55(in Chinese).
[13] ZHENG W. Automated fusion-splicing of polarization maintaining fibers[J].Journal of Lightwave Technology, 1997, 5(1):125-134.
[14] WANG D Y, LIU Ch, SHU X W. Accurate a-lignment of PM fiber[J].Acta Photonica Sinica, 2002, 31(3):345-348(in Chinese).
[15] WANG J E.Study on the manufacturing theory and the key techniques of fused polarization maintaining fiber couplers[D]. Changsha: National University of Defense Technology, 2007: 17-38(in Ch-inese).
[16] WANG J E, LIN Zh H, WU Y L, et al. The auto-alignment technique of PM fiber of MRI[J]. Applied Optics, 2005, 26(5):37-40.
[17] CHEN Sh Y.Theoretical and experimental research on azimuthal alignment method for PM-fiber based on side-viewing image[D]. Guangzhou: Ji'nan University, 2006: 37-46(in Chinese).
[18] CHEN Sh Y, DI H W, CHEN Zh, et al. Azimuthal alignment method for PM fiber based on light intensity distributions with five finger profile[J].Applied Laser, 2006, 26(1):35-38(in Chinese).
[19] WENG X Q, FENG D, HUANG H B, et al. Simulation of PM fibers' azimuthal alignment based on the image correlation of light intensity[J]. Acta Photonica Sinica, 2015, 44(6):0606003(in Chinese). doi: 10.3788/gzxb
[20] LIU Zh H, FENG D, YANG D W, et al. Accurate detection technology for polarization axis of Panda polarization-maintaining fiber. Infrared and Laser Engineering, 2014, 43(10):3388-3393(in Chinese).