[1] ZHANG A F, LI D Ch, LIANG Sh D. Development of laser additive manufacturing of high-performance metal parts[J]. Aeronautical Manufacturing Technology, 2016, 59(22):16-22(in Chinese).
[2] ZHONG M L, NING G Q, LIU W J. Research and development on laser direct manufacturing metallic components[J].Laser Technology, 2002, 26(5):388-391(in Chinese).
[3] HUANG W D, LIN X, CHEN J, et al. Laser solid forming[M]. Xi'an:Northwestern Polytechnical University Press, 2007:2-3(in Chinese).
[4] ZHENG B J, WEI J Y, JIANG Y H, et al. Wear property of NiCoFeCrTi high entropy alloy coating by laser cladding[J]. Laser Technology, 2016, 40(3):432-435(in Chinese).
[5] LI Sh Y, TIAN X G, LI Ch B. Study on wear-resistance and scanning path of laser alloying on end cap working face[J]. Chinese Journal of Lasers, 2013, 40(2):0203004(in Chinese). doi: 10.3788/CJL
[6] SONG J L, LI Y T. Research progress on laser cladding forming technology[J].Journal of Mechanical Engineering, 2010, 46(14):29-39(in Chinese). doi: 10.3901/JME.2010.14.029
[7] LIU F R, GAO Q, GAO D P. Cracking analysis of WC reinforced composites coating by laser cladding[J]. Journal of Material Engineering, 2003, 31(5):37-39(in Chinese).
[8] YAO J H. Laser surface modification technology and application[M].Beijing:National Defense Industry Press, 2012:59-61(in Ch-inese).
[9] ZOU X B, YIN D K, GU J J. A study on the cracks in laser cladding[J]. Laser Journal, 2010, 31(5):44-45(in Chinese).
[10] RONG L R. Laser cladding technology and application of[J]. Me-tal Processing, 2012, 63(15):37-39(in Chinese).
[11] SHEN B, YAN G Ch, WU G. Laser cladding on complex disc cam[J]. Chinese Journal of Lasers, 2009, 36(1):244-248(in Chin-ese). doi: 10.3788/JCL
[12] ZHU G X, ZHANG A F, LI D Ch. Effect of process parameters on surface smoothness in laser cladding[J]. Chinese Journal of Lasers, 2010, 37(1):296-301(in Chinese). doi: 10.3788/JCL
[13] LI Y L, BAI X B, WANG L, et al. Impact of laser cladding process parameters on the microstructure and properties of the cladding layer[J].Thermal Processing, 2009, 38(12):101-103(in Chinese).
[14] ZHANG S Y, ZHENG K Q, ZHENG L. Influence of scanning speed on microstructure and properties of laser cladding WC-B4C-Co coating[J]. Chinese Journal of Lasers, 1993, 20(12):940-943(in Ch-inese).
[15] SHI Sh H, LI B W. Influence of laser cladding process and powder on the cracking behavior of cladding[J].Laser Journal, 1998, 19(3):46-48(in Chinese).
[16] ZHANG D Q, ZHANG J Q, GUO Zh J. Study on microstructure and properties of laser cladding repair 45# steel mould[J]. Mechanical Design and Manufacture, 2017, 2(2):118-120(in Chinese).
[17] LU W. Study on the cracking of the roll cladding layer of laser cladding high speed wire[D]. Beijing: Beijing University of Technology, 2006: 8-10(in Chinese).
[18] ENDRZEJEWSKI R, SLIWINSKI G, KRAWCZUK M. Temperature and stress during laser cladding of double layer coatings[J].Surface and Coatings Technology, 2006, 201(6):3328-3334. doi: 10.1016/j.surfcoat.2006.07.065
[19] ZHANG Ch Ch, SHI Y. Research status and development trend of laser cladding high thickness coating technology[J]. Laser Techno-logy, 2011, 35(4):448-452(in Chinese).