[1] HE M B, MA Zh L, WEI Ch H, et al. Influence of pyrolysis on the laser ablation of carbon-fiber/epoxy composite[J]. Infrared and Laser Engineering, 2016, 45(3):97-100 (in Chinese).
[2] YOSHIDA T, MATSUI S, HOSHINO M, et al. Measurement of elastic constants for composite materials by 3-point bending, twisting and impact sound test[J]. Key Engineering Materials, 2004, 261/263:1611-1616. doi: 10.4028/www.scientific.net/KEM.261-263
[3] MOUCHTACHI A, GUERJOUMA R E, BABOUX J C, et al. Optimal determination of the elastic constants of woven 2D SiC/SiC composite materials[J]. Journal of Physics, 2004, D37(23):3323-3329.
[4] VENETIS J, SIDERIDIS E. Elastic constants of fibrous polymer composite materials reinforced with transversely isotropic fibers[J]. AIP Advances, 2015, 5(3):037118. doi: 10.1063/1.4914961
[5] LIU X, WU Zh J, HE H Y, et al. Cryogenic mechanical properties of unidirectional carbon fiber reinforced epoxy composite[J]. Acta Materiae Compositae Sinica, 2017, 34(11):2437-2445(in Chinese).
[6] ZHOU Zh G, SUN G K, LI Zh, et al. Application of laser ultrasonic testing technology in composite material[J]. Journal of Harbin University of Science and Technology, 2012, 17(6):119-122(in Chin-ese).
[7] BALASUBRAMANIAM K, RAO N S. Inversion of composite material elastic constants from ultrasonic bulk wave phase velocity data using genetic algorithms[J]. Composites(Engineering), 1998, B29(2):171-180.
[8] CASTAGNEDE B, KWANG Y K, WOLFGANG S, et al. Determination of the elastic constants of anisotropic materials using laser-generated ultrasonic signals[J]. Journal of Applied Physics, 1991, 70(1): 150-157. doi: 10.1063/1.350303
[9] WU T T, LIU Y H. Inverse determinations of thickness and elastic properties of a bonding layer using laser-generated surface waves[J]. Ultrasonics, 1999, 37(1):23-30. doi: 10.1016/S0041-624X(98)00030-4
[10] ADAMOWSKI J C, BUIOCHI F, HIGUTI R T. Ultrasonic material characterization using large-aperture PVDF receivers[J]. Ultrasonics, 2010, 50(2):110-115. doi: 10.1016/j.ultras.2009.09.018
[11] ZHAN Y, LIU Ch H, XUE J Ch. Simulation of laser ultrasonic detection micro crack by equivalent load method[J]. Infrared and Laser Engineering, 2016, 45(10):72-76 (in Chinese).
[12] SUN H X, XU B Q. Numerical analysis of laser-generated Lamb waves by finite element method in time and frequency domain[J]. Chinese Journal of Lasers, 2010, 37(2):537-542 (in Chinese). doi: 10.3788/JCL
[13] WANG M Y, ZHOU Y J, GUO Ch. Numerical simulation of laser ultrasonic detection of surface micro-crack depth[J]. Laser Techno-logy, 2017, 41(2):178-181(in Chinese).
[14] GUAN J F, SHEN Zh H, XU B Q, et al. Spectral analysis of the scattering waveform of the laser-generated ultrasonic waves for detecting the crack in the material[J]. Laser Technology, 2005, 29(3):287-290(in Chinese).
[15] DONG L M, NI Ch Y, SHEN Zh H. Determination of elastic constants of materials based on the velocity measurement of laser-generated multi-mode ultrasound[J]. Chinese Journal of Lasers, 2014, 38(4):0408004(in Chinese).
[16] SONG Y F, YU G Y, YIN H D, et al. Temperature dependence of elastic modulus of single crystal sapphire investigated by laser ultrasonic[J]. Acta Physica Sinica, 2012, 61(6):64211 (in Chin-ese).
[17] ZHAN Y, LIU C, ZHANG F, et al. Experimental study and finite element analysis based on equivalent load method for laser ultrasonic measurement of elastic constants[J]. Ultrasonics, 2016, 69:243-247. doi: 10.1016/j.ultras.2016.03.014
[18] XU B Q, LIU H K, XU G D, et al. Mixed stress-displacement finite element method for laser-generated ultrasound[J]. Laser Technology, 2014, 38(2):230-235(in Chinese).
[19] MOUCHTACHI A, DUBUGET M, DEBAH S, et al. Recovering elastic constants of metal matrix composites via piezoelectric transducers and laser generated and detected ultrasonic waves[C]//1994 Proceedings of Ultrasonics Symposium. New York, USA: IEEE, 1994: 1223-1226.
[20] WU T T, LIU Y H. On the measurement of anisotropic elastic constants of fiber-reinforced composite plate using ultrasonic bulk wave and laser generated Lamb wave[J]. Ultrasonics, 1999, 37(6):405-412. doi: 10.1016/S0041-624X(99)00025-6
[21] SUN H X, XU B Q, XU Ch G, et al. Thermally determined near hemispherical resonator for diode-pumped-solid-state laser[J]. Acta Photonica Sinica, 2009, 38(5):1041-1046 (in Chinese).
[22] MUKDADI O M, DATTA S K. Transient ultrasonic guided waves in bilayered anisotropic plates with rectangular cross section[J]. AIP Conference Proceedings, 2004, 70(1):238-245.
[23] LI J, NI Ch Y, ZHANG H Ch. Detection of micro-crack by ultrasonic approach of one-sided pitch-catch method based on laser assisted heating[J]. Chinese Journal of Lasers, 2013, 40(4):0408008 (in Chinese). doi: 10.3788/CJL
[24] QIN L Y, WANG W, YANG G. Experimental study on ultrasonic-assisted laser metal deposition of titanium alloy[J]. Chinese Journal of Lasers, 2013, 40(1):0103001(in Chinese). doi: 10.3788/CJL
[25] XU B Q, NI X W, SHEN Zh H, et al. Numerical simulation of laser-generated ultrasounic by finite element method in the plate material[J]. Chinese Journal of Lasers, 2004, 31(5):621-625(in Chin-ese).
[26] MOREAU A, TAHERI F. Elastic moduli measurements of SiC reinforced alumina at high temperatures using laser-ultrasonics[J]. Materials Science Forum, 1996, 210/213:235-242. doi: 10.4028/www.scientific.net/MSF.210-213