| [1] | LUO Y Q. Research and design of annealing kiln of float glass[D]. Chengdu: Chengdu University of Technology, 2009: 1-2(in Chinese). |
| [2] | UNGER U, WITTENBECHER W. The cutting edge of laser technology[J]. Glass, 1998, 75:101-103. |
| [3] | NISAR S, LI L, SHEIKH M A. Laser glass cutting techniques-A review[J]. Journal of Laser Applications, 2013, 25(4):042010-042011. doi: 10.2351/1.4807895 |
| [4] | LUMLEY R M. Controlled separation of brittle materials using a laser[J].American Ceramic Society Bulletion, 1969, 48(1):850-854. |
| [5] | TSAI C H, LIOU C S. Fracture mechanism of laser cutting with controlled fracture[J]. Journal of Manufacturing Science and Engineering, 2003, 125(8):519-528. |
| [6] | TONSHOFF H K, OSTENDORF A, KULIK C, et al. Final glass products in one processing step by the means of laser radiation[C]//In Proceedings of the 22nd International Congress on Applications of Lasers and Electro-Optics. Jacksonville, USA: Laser Institute America, 2003: 71-80. |
| [7] | NISAR S, SHEIKH M A, LI L, et al. Effect of thermal stresses on chip-free diode laser cutting of glass[J]. Optics & Laser Technology, 2009, 41(3):318-327. |
| [8] | NURSE D, PATERSON N, TAWN A, et al. On the numerical modeling of laser shearing of glass sheets used to optimize production methods[J]. Journal of Mechanical Engineering Science, 2004, 218(1):218-229. |
| [9] | WANG X H, YAO J H, ZHOU G B, et al. Research of the technology of laser cutting LCD glass substrates based on thermal cracking method[J]. Laser Technology, 2011, 35(4):472-476(in Chinese). |
| [10] | WANG Ch G, ZHOU G B, LU Y L, et al. Research of cutting LCD-glass with thermal cracking method based on thermal weight function technology[J]. Chinese Journal of Lasers, 2014, 12(41):1203005(in Chinese). |
| [11] | AKARAPU R, SEGALL A E. Investigation of an active stressing technique for delaying fracture during laser cutting of alumina[C]//International Mechanical Engineering Congress and Exposition. Anaheim California, USA: American Society of Mechanical Engineers, 2004, 15: 173-179. |
| [12] | YAHATA K, YAMAMOTO K. Crack propagation analysis in laser scribing of glass[J]. Journal of Laser Micro/Nano Engineering, 2010, 5(2):109-114. doi: 10.2961/jlmn.2010.02.0002 |
| [13] | LIN H Y, HUANG X H, XU Y Ch, et al. Research progress of graphene passively Q-switched Nd3+-doped lasers[J]. Laser Technology, 2016, 40(2):259-263(in Chinese). |
| [14] | XIA J, JIANG G B, ZHAO Ch J. Numerical study on thulium-doped mode-lock fiber laser with high modulation depth of saturable aborsber[J].Laser Technology, 2016, 40(2):259-263(in Chinese). |
| [15] | LIU H, FENG L Q. Mid-infrared field phase measurement and attosecond pulse generation[J].Laser Technology, 2017, 41(2):151-158(in Chinese). |
| [16] | SOLDATOV A N, MIRZA Y S, POLUNIN Y P. Thermal cleavage of optical glass by strontium-vapor laser radiation[J]. Glass and Ceramics, 2015, 71(12):379-382. |
| [17] | KITAMURA R, PILON L, JONASZ M. Optical constants of silica glass from extreme ultraviolet to far infrared at near room temperature[J]. Applied Optics, 2007, 46(33):8118-8133. doi: 10.1364/AO.46.008118 |
| [18] | AWAJIHI D, HONDA S, NISHIKAWA T. Thermal shock parameters of ceramics evaluated by infrared radiation heating[C]//JSME International Journal Series A (Solid Mechanics and Material Engineering). Tokyo, Japan: Japan Society of Mechanical Engineerings, 1997: 414-436. |
| [19] | YANGS T, MATTHEWS M J, ELHADJ S. Thermal transport in CO2 laser irradiated fused silica in situ measurements and analysis[J]. Journal of Applied Physics, 2009, 106(10):1031061-1031067. |
| [20] | YANG S T, MATTHEWS M J, ELHADJ S, et al. Comparing the use of mid-infrared versus far-infrared lasers for mitigating damage growth on fused silica[J]. Journal of Applied Optics, 2010, 49(14):2606-2616. doi: 10.1364/AO.49.002606 |