[1] IKEDA R,CHO H,SAWABE A.Laser spallation method to measure strength against mode-Ⅰ decohesion of CVD diamond films[J].Diamond Related Materials,2005,14(3):631-636.
[2] MITTAL K L.Adhesion measurement of films and coatings[C]//The First International Symposium on Adhesion Measurement of Films and Coatings.Netherlands,USA:VSP,1995:1-435.
[3] MITTAL K L.Adhesion measurement of films coatings[C]//The Second International Symposium on Adhesion Measurement of Films and Coatings.Boston:VSP,2001:1-351.
[4] FENG A X,ZHANG Y K,XIE H K.A study on the new method of laser scratch testing technique to characterize interfacial adhesion between thin film and substrate[J].Key Engineering Materials,2004,259/260:615-619.
[5] FENG A X,ZHANG Y K,XIE H K.A study on the failure procedure of the film-substrate interface based on the laser scratch testing technique[J].Materials Science Forum,2004,471/472:746-749.
[6] TANG C P,FENG A X,ZHANG Y K,et al.Study on the temperature and stress field of film-substrate system irradiation by gauss laser[J].Applied Laser,2006,26(6):361-364(in Chinese).
[7] LI D L.The numerical simulation of welding stress and distortion[D].Wuhan:Wuhan Science and Technology University,2003:3(in Chinese).
[8] YANG J,LIU S H,WAN P T,et al.3-D numerical study on laser bending of sheet metal[J].Laser Technology,2003,27(2):97-99(in Chinese).
[9] ZHANG J Q,LUO Q,LIU F,et al.The distribution of the thermal stress in the cylinder produced by the laser radiation[J].Chinese Journal of Applied Mechanice,1999,16(4):123-129(in Chinese).
[10] LI M H,LIU A G,SONG Y Z.A numerical simulation for temperature and thermal stress distribution in Nd:YAG amplifiers[J].Laser Technology,2002,26(2):86-88(in Chinese).