[1] |
ZHANG Z G.Analysis on heat treatment residual stress of big diameter crankshaft[J].Heat Treatment of Metals,2005,30(8):91-94(in Chinese). |
[2] |
FANG H,GAO Z,YUAN Z C,et al.Numerical simulation on medium-frequency induction hardening and calculation of residual stress of crankshaft[J].Automotive Engineering,2004,26(3):354-358(in Chinese). |
[3] |
REN X D,ZHANG Y K,ZHOU J Zh,et al.Experiment with QT700 crankshaft by laser shock processing[J].Journal of Jiangsu University (Natural Science Edition),2007,28(4):289-292 (in Chinese). |
[4] |
SUN Y Q,ZHOU J Zh,LIANG Q L,et al.Optimization of laser peening parameters using Taguchi method[J].Laser Technology,2008,32(4):377-380 (in Chinese). |
[5] |
WANG F,YAO Zh Q.Experimental research of laser shock processing brass[J].Laser Technology,2006,30(5):511-513(in Chinese). |
[6] |
REN X D,ZHANG Y K,ZHOU J Zh,et al.Investigation of combination laser treatment technique on engine crankshaft[J].Chinese Internal Combustion Engine Engineering,2007,28(2):56-59(in Chinese). |
[7] |
GAO L,ZHANG Y K.Experimental and numerical simulation of laser shock strengthening of Ni-Co alloy pole[J].Laser Technology,2006,30(5):507-510(in Chinese). |
[8] |
FANG H,GAO Z,YUAN Z C,et al.Research on bending fatigue of quenching-strengthened crankshaft[J].Transactions of CSICE,2003,21(6):465-470(in Chinese). |
[9] |
BA F H,GAN C H,WU W,et al.Study of surface modification by pulse laser of ductile iron[J].Chinese Journal of Lasers,2003,30 (7):663-667 (in Chinese). |
[10] |
NI M X,ZHOU J Zh,YANG C J,et al.Investigation of generation mechanism and influencing factors on residual stress fields by laser shock processing[J].Applied Laser,2006,26(2):73-77(in Chinese). |
[11] |
CAO Z W,ZOU S K,LIU F J,et al.Laser shock processing on 1Cr11Ni2W2MoV martensite steel[J].Chinese Journal of Lasers,2008,35(2):316-320(in Chinese). |