| [1] | SUN T T,YANG Y Q,SU X B,et al. Research of densification of 316L stainless steel powder in selective laser melting process[J]. Laser Technology,2010,34(4):443-446 (in Chinese). |
| [2] | WU W H,YANG Y Q,WANG H W,et al. Research on direct rapid manufacturing of 316L fine metal part using fiber laser[J]. Laser Technology,2009,33(5):486-489 (in Chinese). |
| [3] | STANDARDIZATION ADMINISTRATION of the PEOPLE'S REPUBLIC of CHINA. GB/T 3505-2000 Surface texture: profile method-Terms,Definitions and surface texture parameters[S]. Beijing: China Standardization Press,2009:1-17( in Chinese). |
| [4] | MUMTAZ K,HOPKINSON N. Top surface and side roughness of Inconel 625 parts processed using selective laser melting[J]. Rapid Prototyping Journal,2009,15(2): 96-103. |
| [5] | CHEN G X,WANG Z M,GUAN K,et al. Effects of parameters on surface roughness of samples by selective laser melting[J]. Technology and Test,2009(12):86-89( in Chinese). |
| [6] | PENG C W,ZENG X Y,WANG Z M. Research on macro-quality of stainless steel parts by selective laser melting. Wuhan: Huazhong University of Science Technology,2009:34-40(in Chinese). |
| [7] | SUN T T,YANG Y Q,GUO M H. Analysis of the morphology of 316L stainless part formed by selective laser melting[J]. Laser Journal,2009,30(5):68-70(in Chinese). |
| [8] | WANG D,YANG Y Q. Study on the fabrication properties and process of stainless steel parts by selective laser melting. Guangzhou: South China University of Technology,2011:54-57(in Chinese). |
| [9] | SONG B,DONG S,ZHANG B,et al. Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V[J]. Materials and Design,2012,35:120-125. |
| [10] | DADBAKHSH S,HAO L,JERRARD P G E,et al. Experimental investigation on selective laser melting behaviour and processing windows of in situ reacted Al/Fe2O3 powder mixture[J]. Powder Technology,2012,231:112-121. |
| [11] | BRINKSMEIER E,LEVY G,MEYER D,et al. Surface integrity of selective-laser-melted components[J]. Manufacturing Technology,2010,59(1): 601-606. |
| [12] | YASA E,KRUTH J. Application of laser re-melting on SLM parts[J]. Advances in Production Engineering Management,2011,6(4):259-270. |
| [13] | YASA E,KRUTH J,DECKERS J. Manufacturing by combining selective laser melting and selective laser erosion/laser re-melting[J]. Manufacturing Technology,2011,60(1):263-266. |
| [14] | KRUTH J,YASA E,DECKERS J. Roughness improvement in selective laser melting[C]//Proceedings of the 3rd International Conference on Polymers and Moulds. Gent,Belgium: Ku LeUven,2008: 170-183. |