[1] SHI J, WEN B B, YU Z T, et al. Influencing factors of titanium and titanium alloys shell's stamp forming and its application status[J]. Titanium Industry Progress, 2016, 33(5):1-5(in Chinese).
[2] XING Q L, PENG P, ZHANG Ch J, et al. Influencing factors and technology advances of titanium alloy plate in deep drawing[J]. Titanium Industry Progress, 2015, 32(4):1-7(in Chinese).
[3] YANG J D, ZHOU Y F, YANG T, et al. Nanocrystallization of Ti-6Al-4V alloy by multiple laser shock processing[J]. Laser Technology, 2017, 41(5):754-758(in Chinese).
[4] FU M J, ZHANG T, HAN X Q, et al. Superplastic deformation be-havior of TNW700 titanium alloy sheet[J]. Chinese Journal of Rare Metals, 2016, 40(1):1-7(in Chinese).
[5] XU G D, WANG G Sh. The development of titanium metal and titanium industry[J]. Chinese Journal of Rare Metals, 2009, 33(6):903-912(in Chinese).
[6] XIAO L, SONG W, CHENG W, et al. Mechanical properties of open-cell rhombic dodecahedron titanium alloy lattice structure manufactured using electron beam melting under dynamic loading[J]. International Journal of Impact Engineering, 2017, 100:75-89. doi: 10.1016/j.ijimpeng.2016.10.006
[7] JIA X, LU F Sh, HAO B. Report on china titanium industry progress in 2016[J]. Titanium Industry Progress, 2017, 34(2):1-7(in Ch-inese).
[8] JIA X, LU F Sh, HAO B. Report on China Titanium industry progress in 2017[J]. Iron Steel Vanadium Titanium, 2018, 39(2):1-7(in Chinese).
[9] JIANG J H, DING Y, SHAN A D. Microstructure and mechanical properties of commercial purity Ti rolled at room temperature[J]. The Chinese Journal of Nonferrous Metals, 2010, 20(s1):58-61(in Ch-inese).
[10] CUI C J, PENG Q, ZHANG M J, et al. Characterization of cathodic polarization of industrial pure titanium in sea water by ac impedance technique[J]. Corrosion Science and Protection Technology, 2003, 15(6):327-330(in Chinese).
[11] ZHANG Y, SUN D Q, GU X Y, et al. A hybrid joint based on two kinds of bonding mechanisms for titanium alloy and stainless steel by pulsed laser welding[J]. Materials Letters, 2016, 185:152-155. doi: 10.1016/j.matlet.2016.08.138
[12] PANWISAWAS C, PERUMAL B, WARD R M, et al. Keyhole formation and thermal fluid flow-induced porosity during laser fusion welding in titanium alloys:Experimental and modelling[J]. Acta Materialia, 2017, 126:251-263. doi: 10.1016/j.actamat.2016.12.062
[13] LIU L M, SHI J P, WANG H Y. Research on the low power laser induced arc hybrid welding of titanium alloy thin sheet[J]. Journal of Mechanical Engineering, 2016, 52(18):38-43(in Chinese).
[14] PENG H S, CHEN B H, TANG J L, et al. Effect of laser welding technology on mechanical properties of K418 and 0Cr18Ni9 weld joints[J]. Laser Technology, 2018, 42(2):229-233(in Chinese).
[15] LI Zh, SHI Y, LIU J, et al. Effect of laser welding parameters on microstructure and mechanical properties of commercial pure titanium[J]. Applied Laser, 2016, 36(1):53-57(in Chinese).
[16] XU W F, ZHANG Z L. Microstructure and mechanical properties of laser beam welded TC4/TA15 dissimilar joints[J]. Transactions of Nonferrous Metals Society of China, 2016, 26(12):3135-3146. doi: 10.1016/S1003-6326(16)64445-X
[17] LI Y, XU G X. Metallographic sample preparation and microstructure analysis of TC4 titanium alloy laser welding joints[J]. Hot Working Technology, 2016(13):187-189(in Chinese).
[18] HUANG Sh Sh, QIU Zh W. Research on mechanical properties and microstructure of laser welding joint of automotive TC15 titanium a-lloy[J]. Rare Metals and Cemented Carbides, 2017(5):46-49(in Chinese).
[19] LI B, YUAN F B, LI F N, et al. Feature analysis of coaxial monitoring of welding pool and keyhole during laser deep penetration welding[J]. Laser Technology, 2017, 41(2):255-259(in Chinese).
[20] YANG Ch Ch, XU Y L, TONG Sh, et al. Process research fiber laser welding of TC4 titanium alloy[J]. Applied Laser, 2016, 36(5):543-546(in Chinese).