[1] ZHANG Q L, ZHOU M Zh, CHEN Z J, et al. Technique of non-penetration laser lap welding on galvanized steel and AISI 304 stainless steel[J].Chinese Journal of Lasers, 2011, 38(6):603012(in Chinese).
[2] LAZAR A M, YESPICA W P, MARCELIN S, et al. Corrosion protection of 304L stainless steel by chemical vapor deposited alumina coatings[J]. Corrosion Science, 2014, 81(2):125-131.
[3] XU Z K. Research on automatic mechanical polishing technology and the process optimization for stainless steel thin-wall material workpieces[D]. Wuhan: Huazhong University of Science and Technology, 2013: 27-90(in Chinese).
[4] MA D, XU L G, LI Sh B, et al. Progress in the research of chemical polishing liquid for stainless steel[J]. Material Protection, 2014, 47(9):54-55(in Chinese).
[5] CHEN H. Electrochemical polishing behavior of stainless steel in H2SO4-H3PO4 mixed acid[J]. Plating & Finishing, 2014, 36(5):37-40(in Chinese).
[6] WANG Y, MAN R L, LIANG Y H, et al. Progress in research on surface polishing technologies for stainless steel[J]. Electroplating & Pollution Control, 2012, 32(2):1-4(in Chinese).
[7] FANG J L, HAN K P. Quantitative study on chemical polishing of stainless steel[J].Electroplating & Pollution Control, 1995, 15(6):15-17(in Chinese).
[8] ZHOU M, WEI X, XIE X Zh, et al. Study on polishing process of Al2O3ceramic with 355nm ultraviolet laser[J]. Laser Technology, 2014, 38(4):556-560(in Chinese).
[9] DAI W, ZHENG Zh Zh, LI J J, et al. Research Progress of laser polishing on the metal surface[J].Laser & Optoelectronics Progress, 2015, 52(11):110001(in Chinese).
[10] HUA X G, WEI X, ZHOU M, et al. Experimental study on mechanism of 355nm ultraviolet laser polishing of Al2O3 ceramics[J]. Chinese Journal of Lasers, 2014, 41(12):1203002(in Chinese).
[11] BORDATCHEV E V, HAFIZ A M K, TUTUNEA-FATAN O R. Performance of laser polishing in finishing of metallic surfaces[J]. International Journal of Advanced Manufacturing Technology, 2014, 73(1/4):35-52.
[12] NA R, CHEN T. Research of YAG laser of 38CrMoAl surface[J]. Laser & Optoelectronics Progress, 2016, 53(1):11402(in Chinese).
[13] PERRY T L, WERSCHMOELLER D, LI X C, et al. The effect of laser pulse duration and feed rate on pulsed laser polishing of micro-fabricated nickel samples[J]. Journal of Manufacturing Science and Engineering, 2009, 131(3):031002.
[14] ZHU B, QI L T, WANG Y. The experimental study of water-assisted laser machining[J]. Modern Manufacturing Engineering, 2003, 26(12):73-74(in Chinese).
[15] CHEN T, WANG C H, WU J, et al.The current research situation of laser polishing technology[J]. New Technology & New Process, 2009, 31(9):70-73(in Chinese).
[16] DU Y L, MA N, LI H B. Surface treatment of austenitic stainless steel equipment in nuclear power plant-pickling and passivation[J]. Science &Technology Information, 2011, 28(11):44-47(in Chinese).
[17] YAO Q F, GUO J Ch, GUAN C Sh. A study on stainless steel chemcial polishing at room temperature[J]. Plating & Finishing, 2000, 28(2):29-32(in Chinese).
[18] YAO Y W, QIU L, ZHAO Ch M, et al. Chemical polishing technology of stainless steel[J]. Plating & Finishing, 2010, 32(9):5-7(in Chinese).
[19] YIN S H, GUO Zh N, CHEN T N, et al. The explosive boiling experiment study on underwater laser processing[J]. Electromachining & Mould, 2016, 51(3):36-41(in Chinese).
[20] LI W, YANG K Ch, XIA M, et al. Distribution characteristics of scattered light intensity on coated air bubble in water[J]. Acta Optica Sinica, 2008, 28(4):799-803(in Chinese).