|
[1]
|
van SPENGEN W M,PUERS R,MERTENS R,et al.A low frequency electrical test set-up for the reliability assessment of capacitive RF MEMS switches[J].Journal of Micromechanics and Microengineering,2003,13(5):604-612. |
|
[2]
|
BRAZZLE J D,TAYLOR W P,GANESH B,et al.Solution hardened platinum alloy flexurematerials for improved performance and reliability of MEMS devices[J].Journal of Micromechanics and Microengineering,2004,15(1):43-48. |
|
[3]
|
MILLER S L,RODGERS M S,la VIGNE G,et al.Failure modes in surface micromachined microelectromechanical actuation systems[J].Microelectronics Reliability,1999,38(8):1229-1237. |
|
[4]
|
HENCK S A.Lubrication of digital micromirror devices[J].Tribology Letters,1997,3(3):239-247. |
|
[5]
|
PATTON S T,ZABINSKI J S.Failure mechanisms of a MEMS actuator in very high vacuum[J].Tribology International,2002,35(6):373-379. |
|
[6]
|
SMALLWOOD S A,EAPEN K C,PATTON S T,et al.Performance results of MEMS coated with a conformal DLC[J].Wear,2006,260(11/12):1179-1189. |
|
[7]
|
PEYRE P,FABBRO R,MERRIEN P,et al.Laser shock processing of aluminum alloys application to high cycle fatigue behavior[J].Materials Science and Engineering,1996,210(1/2):102-113. |
|
[8]
|
FAIRAND B P,CLAUER A H.Use of laser generated shocks to improve the properties of metals and alloys[J].SPIE,1976,86:112-119. |
|
[9]
|
REN N F,YANG J Ch,CAN L.Effects of laser shocking on the mechanical properties of metals[J].Laser Technology,1998,22(4):235-238(in Chinese). |
|
[10]
|
PARKER A.Shocked and stressed,metals get stronger[J].Science Technology Review,2001(3):26-28. |
|
[11]
|
WANG G L,ZHOU J Zh,ZHANG X Q,et al.Application of laser-induced shock wave in surface modification and forming of sheet metal[J].Transactions of the Chinese Society for Agricultural Machinery,2005,36(12):148-152(in Chinese). |
|
[12]
|
FABBRO R,FOURNIER J,BALLARD P,et al.Physical study of laser-produced plasma in confined geometry[J].J A P,1990,68(2):775-782. |
|
[13]
|
ZHANG W W,YAO Y L.Micro scale laser shock processing of metallic components[J].Journal of Manufacturing Science and Engineering,2002,124(2):369-378. |
|
[14]
|
ZHANG W W,YAO Y L.Microscale laser shock processing-modeling testing,and microstructure characterization[J].Journal of Manufacturing Processes,2001,3(2):128-143. |
|
[15]
|
GEERS M G D,BREKELMANS W A M,JANSSEN P J M.Size effects in miniaturized polycrystalline FCC samples:strengthening versus weakening[J].International Journal of Solids and Structures,2006,43(24):7304-7321. |
|
[16]
|
YANG K,DONG P L,LI B Ch.Micro laser shock forming technology[J].Machinery Manufacture,2007,45(12):23-26(in Chinese). |
|
[17]
|
CHEN H Q,YAO Y L,KYSAR J W.Spatially resolved characterization of residual stress induced by micro scale laser shock peening[J].Journal of Manufacturing Science and Engineering,2004,126(2):226-236. |
|
[18]
|
MURR L E.Microstructure-mechanical property relations,shockwave and high-strain-rate phenomena in metals[M].New York:Plenum Press,1981:607-671. |
|
[19]
|
CHEN H Q,WANG Y N,KYSAR J W,et al.Study of anisotropic character induced by microscale laser shock peening on a single crystal aluminum[J].J A P,2007,101(2):024904/1-024904/8. |
|
[20]
|
WANG Y N,KYSAR J W,YAO Y L.Analytical solution of anisotropic plastic deformation induced by micro-scale laser shock peening[J].Mechanics of Materials,2008,40(3):100-114. |
|
[21]
|
ZHANG W W,YAO Y L.Microscale laser shock peening of thin films,part 2:high spatial resolution material characterization[J].Journal of Manufacturing Science and Engineering,2004,126(1):18-24. |
|
[22]
|
AKITA K,TANAKA H,SANO Y,et al.Compressive residual stress evolution process by laser peening[J].Materials Science Forum,2005,490/491:370-375. |
|
[23]
|
CHEN H Q,KYSAR J W,YAO Y L.Characterization of plastic deformation induced by microscale laser shock peening[J].Journal of Applied Mechanics,2004,71(5):713-723. |
|
[24]
|
CHEN H Q,YAO Y L,KYSAR J W,et al.Fourier analysis of X-ray micro-diffraction profiles to characterize laser shock peened metals[J].International Journal of Solids and Structures,2005,42(11/12):3471-3485. |
|
[25]
|
ZHANG W,YAO Y L.Feasibility study of inducing desirable residual stress distribution in laser micromachining[J].Transactions of the North American Manufacturing Research Institution of SME,2001,29:413-420. |
网站地图
点击查看大图
下载:
