高功率光纤激光焊接的研究进展

崔丽; 张彦超; 贺定勇; 李晓延; 蒋建敏

doi:10.3969/j.issn.1001-3806.2012.02.003

高功率光纤激光焊接的研究进展

1.
北京工业大学材料科学与工程学院北京 100124

作者简介: 崔丽(1972- ),女,博士,副研究员,硕士生导师,现主要从事轻金属材料激光焊接的研究.E-mail:cuili@bjut.edu.cn.

基金项目:
北京市教育委员会科技计划资助项目(00900054R5004)
中图分类号: TG456.7

Research progress of high power fiber laser welding

1.
College of Materials Science and Engineering, Beijing University of Technology, Beijing 100124, China
CLC number: TG456.7

摘要: 光纤激光焊接是一种具有较好工业应用前景的新技术,目前已经引起了国内外学者的重视。详细讨论了高功率光纤激光焊接低碳钢及低合金钢、不锈钢、高强钢、铝合金、镁合金、钛合金等材料的研究现状,分析了高功率光纤激光焊接的特点,最后总结了高功率光纤激光焊接研究进展,并提出了研究的方向。
- 激光技术 /
- 光纤激光焊接 /
- 高功率激光 /
- 研究进展
Abstract: Fiber laser welding is a promising technology which can be widely used in industry and it attracts attention of the researchers in the worldwide.In this article,a detailed review of the research status on the high power fiber laser welding of low carbon,low alloy steel,stainless steel,high strength steel,aluminum alloy,magnesium alloy,and titanium alloy,et al,were discussed.Also,the characteristics of fiber laser welding developed were presented.Finally,the research progress of high power fiber laser welding was summarized and further work on the fiber laser welding process was described.Fiber laser welding is a promising technology which can be widely used in industry and it attracts attention of the researchers in the worldwide.In this article,a detailed review of the research status on the high power fiber laser welding of low carbon,low alloy steel,stainless steel,high strength steel,aluminum alloy,magnesium alloy,and titanium alloy,et al,were discussed.Also,the characteristics of fiber laser welding developed were presented.Finally,the research progress of high power fiber laser welding was summarized and further work on the fiber laser welding process was described.
- laser technique /
- fiber laser welding /
- high power laser /
- research progress

[1]	JEONG Y,SAHU J K,PAYNE D N,et al.Ytterbium doped large core fiber laser with 1 kW of continuous wave output power[J].Electronics Letters,2004,40(8):470.
[2]	RENALD S.Laser beam welding with 5kW single mode fiber laser[R].Dresden,Germany:Fraunhofer IWS,2009:34-35.
[3]	SALMINEN A,PIILI H,PURTONEN T.The characteristics of high power fibre laser welding[J].Proceedings of the Institution of Mechanical Engineers,Part C:Journal of Mechanical Engineering Science,2010,224(5):1019-1029.
[4]	SALMINEN A,FELLMAN A.The effect of laser and welding parameters on keyhole and melt pool behavior during laser welding[C]//ICALEO 2007.Orlando,USA:Laser Institute of America,2007:416-427.
[5]	SALMINEN A,LEHTINEN J,HARKKO P.The effect of welding parameters on keyhole and melt pool behavior during laser welding with high power fiber laser[C]//ICALEO 2008.Temecula,California,USA:Laser Institute of America,2008:354-363.
[6]	KINOSHITA K,MIZUTANI M,KAWAHITO Y,et al.Phenomena of welding with high power fiber laser[C]//ICALEO 2006.Scottsdale,USA:Laser Institute of America,2006:535-542.
[7]	BROCKMANN R,MANN K,SCHLUETER H,et al.High performance industrial disk lasers for a broad range of applications[C]//ICALEO 2007.Orlando,USA:Laser Institute of America,2007:866-870.
[8]	VOLLERTSEN F,THOMY C.Welding with fiber laser from 200 to 17000W[C]//Section D-ICALEO.Miami,USA:Laser Institute of America,2005:254-263.
[9]	HAFEZ K M,KATAYAMA S.Fiber laser welding of AISI 304stainless steel plates[J].Quarterly Journal of the Japan Welding Society,2009,27(2):69-73.
[10]	KAWAHITO Y,MIZUTANI M,KATAYAMA S.Elucidation of high-power fiber laser welding phenomena of stainless steel and effect of factors on weld geometry[J].Journal of Physics,2007,D40(19):5854-5859.
[11]	KATAYAMA S,KAWAHITO Y,MIZUTANI M.Elucidation of laser welding phenomena and factors affecting weld penetration and welding defects[J].Physics Procedia,2010,5(2):9-17.
[12]	KAWAHITO Y,MIZUTANI M,KATAYAMA S.Defect formation mechanism and reduction procedure in 10kW high power fiber laser welding of stainless steel[J].Quarterly Journal of the Japan Welding Society,2008,26(3):203-209.
[13]	KAWAHITO Y,MATSUMOTO N,ABE Y,et al.Laser absorption characteristics in high power fiber laser welding of stainless steel[J].Quarterly Journal of the Japan Welding Society,2009,27(3):183-188.
[14]	KAWAHITO Y,KINOSHITA K,MATSUMOTO N,et al.Interaction between laser beam and plasma/plume induced in welding of stainless steel with ultra-high power density fiber laser[J].Quarterly Journal of the Japan Welding Society,2007,25(3):461-467.
[15]	KAWAHITO Y,KINOSHITA K,MATSUMOTO N,et al.Highspeed observation and spectroscopic analysis of laser-induced plume in high-power fiber laser welding of stainless steel[J].Quarterly Journal of the Japan Welding Society,2007,25(3):455-460.
[16]	KAWAHITO Y,OIWA S,MIZUTANI M,et al.Effects of laser-induced plume in high-power fiber laser welding with long-focal-distance focusing optics[J].Quarterly Journal of the Japan Welding Society,2011,29(1):18-23.
[17]	ZHANG X,ASHIDA E,KATAYAMA S,et al.Deep penetration welding of thick section steels with 10kW fiber laser[J].Quarterly Journal of the Japan Welding Society,2009,27(2):64-68.
[18]	WESTIN E M,FELLMAN A.Effect of laser and laser hybrid welding on the corrosion performance of a lean duplex stainless steel[J].Journal of Laser Application,2010,22(4):150-158.
[19]	HU L.Study of fiber laser welding for 6mm stainless steel 304[D].Zhengjiang:Jiangsu University,2010:55-67(in Chinese).
[20]	LIU Zh J.Study on laser-arc hybrid welding of high strength steel[D].Nagoya,Japan:Nagoya University PhD Dissertation,2007:94-106.
[21]	QUINTINO L,COSTA A,MIRANDA R,et al.Welding with high power fiber lasers-a preliminary study[J].Mater Design,2007,28(4):1231-1237.
[22]	MIRANDA R,COSTA A,QUINTINO L,et al.Characterization of fiber laser welds in X100 pipeline steel[J].Materials and Design,2009,30(7):2701-2707.
[23]	WANG P,XIN L J,HUANG T,et al.Study of fiber laser welding for automotive high strength steel[J].Applied Laser,2009,29(4):286-289(in Chinese).
[24]	ALLEN C M,VERHAEGHE G,HILTON P A,et al.Laser and hybrid laser-MIG welding of 6.35 and 12.7mm thick aluminum aerospace alloy[J].Materials Science Forum,2006,519/521:1139-1144.
[25]	LIMA M S F,RIVA R,de OLIVEIRA A C,et al.Laser beam welding aerospace aluminum using fiber lasers[J].Proceedings of SPIE,2009,7131:713128/1-713128/4.
[26]	KATAYAMA S,NAGAYAMA H,MIZUTANI M,et al.Fiber laser welding of aluminum alloy[J].Welding International,2009,23(10):744-752.
[27]	MEILF,CHENGY,JINXZh,etal.Study on fiber laser overlap-welding of automobile aluminum alloy[J].Chinese Journal of Lasers,2010,37(8):2091-2097(in Chinese).
[28]	YU Y Ch,WANG Ch M,HU X Y,et al.Porosity in fiber laser formation of 5A06 aluminum alloy[J].Journal of Mechanical Science and Technology,2010,24(5):1077-1082.
[29]	TU J F,PALEOCRASSAS A G.Fatigue crack fusion in thin-sheet aluminum alloys AA7075-T6 using low-speed fiber laser welding[J].Journal of Materials Processing Technology,2011,211(1):95-102.
[30]	HU P P,WANG Ch M,HU X Y.Microstructure features of medium thickness aluminum alloy with fiber laser-MIG hybrid welding[J].Electric Welding Machine,2010,40(11):42-46(in Chinese).
[31]	YU L,NAKATA K,YAMAMOTO N,et al.Texture and its effect on mechanical properties in fiber laser weld of a fine-grained Mg alloy[J].Materials Letters,2009,63(11):870-872.
[32]	CHOWDHURY S M,CHEN D L,BHOLE S D,et al.Microstructure and mechanical properties of fiber laser welded and diode laser welded AZ31 magnesium alloy[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2010,42(7):1974-1989.
[33]	LIU J,DONG J H,WU Y J.Analysis of welding procedure and welded joint microstructure of fiber laser welding Mg alloys[J].Journal of Materials Engineering,2009(sl):176-179(in Chinese).
[34]	LIU J,DONG J H,SHINOZAKI K.Microstructure characteristics of fiber laser welding for AZ91D Mg alloy[J].Rare Metal Materials and Engineering,2009,38(s3):202-204(in Chinese).
[35]	COSTA A,MIRANDA R,QUINTINO L,et al.Analysis of beam material interaction in welding of titanium with fiber lasers[J].Materials and Manufacturing Processes,2007,22(7/8):798-803.
[36]	CUI L,KUTUSNA M,SIMIZU T,et al.Fiber laser-GMA hybrid welding of commercially pure titanium[J].Materials and Design,2009,30(1):109-114.
[37]	DAI Y Ch,WANG D F,YANG Y G.Laser welding repairing technology of aircraft Ti-alloy structure[J].Aeronautical Manufacturing Technology,2010(10):92-94(in Chinese).
[38]	LI Y,CHEN Y J.Experiment study about welding quality factors on laser welding of galvanized sheet[J].Journal of Shaoyang University(Natural Science Edition),2010,7(3):43-46(in Chinese).
[39]	KAWAHITO Y,TERAJIMA T,KIMURA H,et al.High-power fiber laser welding and its application to metallic glass Zr55 AL10 Ni5 Cu30[J].Materials Science and Engineering,2008,B148(1/3):105-109.

[1]	陈菊芳 , 王江涛 , 周金宇 . 镁合金表面激光熔覆技术的研究进展. 激光技术, 2015, 39(5): 631-636. doi: 10.7510/jgjs.issn.1001-3806.2015.05.010
[2]	宋新华 , 金湘中 , 陈胜迁 , 袁江 , 张明军 . 激光-电弧复合焊接及应用于车身制造的进展. 激光技术, 2015, 39(2): 259-265. doi: 10.7510/jgjs.issn.1001-3806.2015.02.024
[3]	鄢锉 , 李力钧 , 李娟 , 谢小柱 , 张屹 . 激光切割板材表面质量研究综述. 激光技术, 2005, 29(3): 270-274.
[4]	倪晓武 , 陆建 , 贺安之 , 王平秋 , 马孜 , 周九林 . 高功率激光对光学介质薄膜破坏机理的研究进展. 激光技术, 1994, 18(6): 348-352.
[5]	季小玲 , 陶向阳 , 吕百达 . 高功率激光束的远场特性研究. 激光技术, 2004, 28(3): 251-254.
[6]	王天明 , 李斌成 , 赵斌兴 , 孙启明 . 高功率激光作用下光学元件非线性热效应研究. 激光技术, 2022, 46(6): 729-735. doi: 10.7510/jgjs.issn.1001-3806.2022.06.003
[7]	陆建 , 倪晓武 , 贺安之 . 高功率激光与材料相互作用机理研究进展. 激光技术, 1996, 20(3): 181-184.
[8]	成华 , 屈乾华 , 吕百达 , 钟鸣 . 热容型钕玻璃棒状激光器特性的理论研究. 激光技术, 2005, 29(4): 347-349,353.
[9]	张林 , 杜凯 , 周兰 , 涂海燕 . 高功率激光单层SiO2减反膜的研制. 激光技术, 1996, 20(3): 150-152.
[10]	陆建 , 倪晓武 , 贺安之 . 高功率YAG激光作用于金属靶的力学响应. 激光技术, 1994, 18(6): 361-365.
[11]	李成荣 , 陈秀艳 , 李修 , 郑新亮 , 汪俊 , 陈浩伟 , 任兆玉 , 白晋涛 . 164W LD侧抽运准连续Nd：YAG/HGTR-KTP高功率绿光激光器. 激光技术, 2009, 33(3): 291-293,296.
[12]	李紫婷 , 刘晅亚 . 飞秒激光成丝在火焰中诱导的荧光辐射及应用. 激光技术, 2019, 43(5): 729-734. doi: 10.7510/jgjs.issn.1001-3806.2019.05.027
[13]	吕百达 . 关于激光光束质量若干问题的分析. 激光技术, 1998, 22(1): 14-17.
[14]	薛海中 , 陆富源 , 薛梅 , 柳强 , 过振 , 张海涛 , 巩马理 . Yb：YAG板条激光器谐振腔设计与光束质量测量. 激光技术, 2006, 30(6): 585-588.
[15]	邹彪 , 陈建平 , 倪晓武 . 强激光等离子体有关物理量的声学测量. 激光技术, 2000, 24(6): 366-369.
[16]	张熠星 , 尚建华 , 贺岩 . 机载激光测深技术的研究进展. 激光技术, 2018, 42(5): 588-592. doi: 10.7510/jgjs.issn.1001-3806.2018.05.002
[17]	庞继伟 , 王超 , 蔡玉奎 . 玻璃材料激光加工技术的研究进展. 激光技术, 2021, 45(4): 417-428. doi: 10.7510/jgjs.issn.1001-3806.2021.04.003
[18]	沈俊 , 尚建华 , 贺岩 . 全波形机载激光雷达数据处理技术的研究进展. 激光技术, 2018, 42(3): 295-299. doi: 10.7510/jgjs.issn.1001-3806.2018.03.002
[19]	罗贤锋 , 游利兵 , 徐健 , 方晓东 , 罗乐 . 基于激光诱导击穿光谱的元素成像技术研究进展. 激光技术, 2020, 44(1): 66-73. doi: 10.7510/jgjs.issn.1001-3806.2020.01.012
[20]	吕国瑞 , 卞进田 , 温佳起 , 孔辉 , 徐海萍 , 郭磊 , 王荣庆 . 窄谱宽中红外激光技术研究进展. 激光技术, 2023, 47(6): 742-750. doi: 10.7510/jgjs.issn.1001-3806.2023.06.003

点击查看大图

计量

文章访问数: 3943
HTML全文浏览量: 620
PDF下载量: 1076
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

高功率光纤激光焊接的研究进展

作者简介: 崔丽(1972- ),女,博士,副研究员,硕士生导师,现主要从事轻金属材料激光焊接的研究.E-mail:cuili@bjut.edu.cn.

Research progress of high power fiber laser welding

计量

高功率光纤激光焊接的研究进展

作者简介: 崔丽(1972- ),女,博士,副研究员,硕士生导师,现主要从事轻金属材料激光焊接的研究.E-mail:cuili@bjut.edu.cn

English Abstract

Research progress of high power fiber laser welding

全文HTML

目录

留言板

高功率光纤激光焊接的研究进展

作者简介: 崔丽(1972- ),女,博士,副研究员,硕士生导师,现主要从事轻金属材料激光焊接的研究.E-mail:cuili@bjut.edu.cn.

Research progress of high power fiber laser welding

计量

出版历程

高功率光纤激光焊接的研究进展

作者简介: 崔丽(1972- ),女,博士,副研究员,硕士生导师,现主要从事轻金属材料激光焊接的研究.E-mail:cuili@bjut.edu.cn

English Abstract

Research progress of high power fiber laser welding

全文HTML

目录