飞秒激光诱导硅材料表面周期结构的研究

高胜淼; 闫珂柱; 韩培高; 许春玉; 王荣新

doi:10.7510/jgjs.issn.1001-3806.2015.03.025

飞秒激光诱导硅材料表面周期结构的研究

1.
曲阜师范大学激光研究所山东省激光偏光与信息技术重点实验室, 曲阜 273165

作者简介: 高胜淼(1988-),男,硕士研究生,主要从事飞秒激光与物质相互作用方面的研究。.

通讯作者: 闫珂柱, yankezhu@126.com ;

基金项目:
国家自然科学基金资助项目(11104160);山东省博士基金资助项目(2011BSB01110);信息功能材料国家重点实验室开放课题资助项目
中图分类号: TN249

Study on periodic structures on Si surface induced by femtosecond laser

1.
Shandong Provincial Key Laboratory of Laser Polarization and Information Technology, Institute of Laser Research, Qufu Normal University, Qufu 273165, China

Corresponding author: YAN Kezhu, yankezhu@126.com ;

CLC number: TN249

摘要: 为了研究飞秒激光诱导的硅材料周期表面结构,采用了理论分析和实验验证相结合的方法,对波纹周期与入射激光波长之间关系的理论分析计算,得到了单晶硅表面波纹周期约为800nm,研究了1kHz的飞秒脉冲(中心波长800nm,脉宽35fs)加工单晶硅引起的波纹结构。结果表明,在功率密度略大于样品损伤阈值的条件下,单晶硅表面形成了清晰的平行等间距直线周期条纹结构,测得该条纹的周期约为750nm,与所用激光中心波长接近。使用可旋转的格兰-泰勒棱镜改变入射激光的偏振方向,发现周期波纹方向随入射激光偏振方向的改变而改变,条纹方向与飞秒激光的电矢量方向垂直,并且由加工图片看出经辐照过的区域比未经辐照区域干净得多。这一结果对进一步研究激光诱导的周期性表面结构具有参考意义。
- 激光光学 /
- 周期波纹 /
- 辐照 /
- 单晶硅 /
- 偏振方向 /
- 辐照 /
- 损伤阈值
Abstract: In order to study periodic structures on Si surface induced by femtosecond laser, the relationship between the ripple period and the incident laser wavelength was analyzed. After theoretical analysis and experimental verification, the ripple period of monocrystalline silicon was calculated to be about 800nm. The ripple structures irradiated by 1kHz femtosecond pulses (center wavelength of 800nm, pulse width of 35fs) were studied. The results show that a set of liner ripple structure with parallel and equal spaces is found on the silicon surface irradiated by pulse laser under the condition that power density is slightly higher than damage threshold of the workpiece. The period of ripples is about 750nm by measurement, close to the center wavelength of laser. When the polarization direction of incident laser is changed by a rotatable Glan-Taylor prism, the direction of periodic ripples is changed accordingly. The direction of ripple is perpendicular to the electric vector direction of the femtosecond laser. The processing images show that the irradiated area is much cleaner than the non-irradiated area. The investigation is significant for further study of laser-induced periodic surface structures.
- laser optics /
- period ripples /
- irradiation /
- monocrystalline silicon /
- polarization direction /
- irradiation /
- damage threshold

[1]	ZHOU M, YUAN D Q,LI J, et al. Microand nano-structures on metal induced by fentosecond laser radiation[J].Spectroscopy and Spectral Analysis, 2009,29(6): 1454-1458 (in Chinese) .
[2]	WANG Y R,LI Y,HE Sh T,et al.Femtosecond laser directly writing two dimensional metal sub-wavelength hole array applicable to terahertz band[J].Laser Optoelectronics Progress,2011(5):051402(in Chinese).
[3]	XU B, WU X Y, LING Sh Q, et al. Numerical simulation of thermal electron emission in metal films ablated by multi-pulse femtosecond laser[J].Laser Optoelectronics Progress,2012(8):083201(in Chinese).
[4]	JEON S, MALYARCHUK V, ROGERS J A, et al. Fabricating three-dimensional nanostructures using two photon lithography in a single exposure step[J]. Optics Express, 2006, 14(6): 2300-2308.
[5]	YU H.Study on measurement of femtosecond laser pulse width[J]. Laser Technology, 2013, 37(5): 679-681(in Chinese).
[6]	BAI L, ZHAO X L, LIU Y, et al. Optical fiber micro-hole sensor fabricated with femtosecond laser[J]. Laser Technology, 2013, 37(1): 101-104(in Chinese).
[7]	NI X, SUN Q, CHEN Y, et al. Nano-ripples structure on material surface during femtosecond laser ablation[J].Nanotechnology and Precision Engineering, 2009, 7(1): 47-50(in Chinese).
[8]	YANG Ch H, LIANG X H, TANG D Ch, et al. Evolution of silicon surface microstructure induced by Nd:YAG nanosecond laser[J]. Acta Physica Sinica, 2010 (10): 7015-7019(in Chinese).
[9]	BONSE J, BAUDACH S, KRVGER J, et al. Femtosecond laser ablation of silicon-modification thresholds and morphology[J]. Applied Physics, 2002,A74(1):19-25.
[10]	MIAO E M.Analysis of thermal influence of Si processed with femtosecond laser[J].China Mechanical Engineering , 2009, 15(12):1869-1872 (in Chinese).
[11]	BONCH-BRUEVICH A M, LIBENSON M N, MAKIN V S, et al. Surface electromagnetic waves in optics[J]. Optical Engineering, 1992, 31(4): 718-730.
[12]	BOROWIEC A, HAUGEN H K. Subwavelength ripple formation on the surfaces of compound semiconductors irradiated with femtosecond laser pulses[J]. Applied Physics Letters, 2003, 82(25): 4462-4464.

[1]	张犇 , 李荣玉 , 俞忠兴 , 王炯 , 韦正辉 . 基于太空环境下的光纤辐照损伤理论. 激光技术, 2005, 29(2): 148-149,164.
[2]	刘锐 , 殷宗敏 , 李荣玉 . 石英光纤受辐照后的透过率研究. 激光技术, 2000, 24(6): 363-366.
[3]	袁根福 , 曾晓雁 . 单晶硅的激光铣削试验研究. 激光技术, 2003, 27(5): 460-462,465.
[4]	钟发成 , 吕雪明 , 李佳桂 , 沈中华 , 陆健 , 倪晓武 . 组合激光对单晶硅热作用的数值分析. 激光技术, 2017, 41(5): 637-643. doi: 10.7510/jgjs.issn.1001-3806.2017.05.004
[5]	齐立涛 , 陈金鑫 , 田振 . 不同环境中纳秒激光烧蚀单晶硅的物质抛出机理. 激光技术, 2023, 47(6): 824-830. doi: 10.7510/jgjs.issn.1001-3806.2023.06.014
[6]	雷震 , 张立文 , 张晓玲 , 孟庆端 . 高斯激光辐照焦平面探测器温度场分析与仿真. 激光技术, 2016, 40(4): 516-520. doi: 10.7510/jgjs.issn.1001-3806.2016.04.013
[7]	周冰 , 贺宣 , 刘贺雄 , 李秉璇 , 张炎 . 激光辐照非制冷微测辐射热计的理论研究. 激光技术, 2020, 44(4): 411-417. doi: 10.7510/jgjs.issn.1001-3806.2020.04.003
[8]	李玉瑶 , 王菲 , 孙同同 . 薄膜激光损伤阈值标定技术. 激光技术, 2021, 45(6): 729-734. doi: 10.7510/jgjs.issn.1001-3806.2021.06.009
[9]	黄进 , 吕海兵 , 王海军 , 赵松楠 , 王韬 , 蒋晓东 , 袁晓东 , 郑万国 . 利用紫外激光处理提高熔石英损伤阈值的研究. 激光技术, 2009, 33(3): 297-299,313.
[10]	王云萍 , 侯军燕 , 袁春 , 康文运 , 陈安民 , 张鲁薇 . 飞秒激光对多光谱滤波片的损伤阈值研究. 激光技术, 2022, 46(5): 697-701. doi: 10.7510/jgjs.issn.1001-3806.2022.05.020
[11]	戴罡 , 陆建 , 王斌 , 刘剑 , 倪晓武 . 脉宽1ms和10ns的激光损伤光学薄膜元件的比较分析. 激光技术, 2011, 35(4): 477-480,542. doi: 10.3969/j.issn.1001-3806.2011.04.010
[12]	娄德元 , 熊厚 , 伍义刚 , 翟中生 , 陈列 , 戚得众 , 杨奇彪 , 刘顿 . 不同脉宽纳秒激光致铝材损伤特性与打孔机理. 激光技术, 2017, 41(3): 427-432. doi: 10.7510/jgjs.issn.1001-3806.2017.03.024
[13]	李玉瑶 , 张婉怡 , 刘喆 , 李美萱 , 付秀华 . S-on-1测量方式下薄膜激光损伤的累积效应. 激光技术, 2018, 42(1): 39-42. doi: 10.7510/jgjs.issn.1001-3806.2018.01.008
[14]	李尧 , 吴涓 , 林佶翔 , 王雄飞 , 朱辰 . 光纤端面脉冲激光诱导损伤测试实验研究. 激光技术, 2009, 33(5): 490-492,496. doi: 10.3969/j.issn.1001-3806.2009.05.025
[15]	廖海 , 孙年春 , 冯国英 , 周传明 . 532nm激光对面阵和线阵CCD损伤效应实验研究. 激光技术, 2010, 34(5): 643-646. doi: 10.3969/j.issn.1001-3806.2010.O5.018
[16]	江天 , 程湘爱 . 激光辐照3CCD规则分布亮点的研究. 激光技术, 2010, 34(2): 168-169,213. doi: 10.3969/j.issn.1001-3806.2010.02.007
[17]	王伟平 , 谭福利 , 吕百达 . 强激光束辐照下窗口材料热力效应数值模拟. 激光技术, 2005, 29(5): 452-454,458.
[18]	杨鹏 , 杨雁南 . 激光辐照单晶硅电池转换效率的研究. 激光技术, 2012, 36(5): 696-699. doi: 10.3969/j.issn.1001-3806.2012.05.031
[19]	郑业亮 , 胡以华 , 赵楠翔 , 任晓东 . 脉宽及重频对HgCdTe探测器损伤阈值影响分析. 激光技术, 2018, 42(2): 265-270. doi: 10.7510/jgjs.issn.1001-3806.2018.02.024
[20]	陶华锋 , 杨忠孝 , 宁永功 , 屠晶景 , 徐洪艳 . 激光处理GaN薄膜的研究. 激光技术, 2005, 29(6): 652-653,656.

点击查看大图

计量

文章访问数: 3000
HTML全文浏览量: 773
PDF下载量: 505
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

飞秒激光诱导硅材料表面周期结构的研究

作者简介: 高胜淼(1988-),男,硕士研究生,主要从事飞秒激光与物质相互作用方面的研究。.

通讯作者: 闫珂柱, yankezhu@126.com ;

Study on periodic structures on Si surface induced by femtosecond laser

Corresponding author: YAN Kezhu, yankezhu@126.com ;

计量

飞秒激光诱导硅材料表面周期结构的研究

通讯作者: 闫珂柱, yankezhu@126.com;

作者简介: 高胜淼(1988-),男,硕士研究生,主要从事飞秒激光与物质相互作用方面的研究。

English Abstract

Study on periodic structures on Si surface induced by femtosecond laser

Corresponding author: YAN Kezhu, yankezhu@126.com

全文HTML

目录

留言板

飞秒激光诱导硅材料表面周期结构的研究

作者简介: 高胜淼(1988-),男,硕士研究生,主要从事飞秒激光与物质相互作用方面的研究。.

通讯作者: 闫珂柱, yankezhu@126.com ;

Study on periodic structures on Si surface induced by femtosecond laser

Corresponding author: YAN Kezhu, yankezhu@126.com ;

计量

出版历程

飞秒激光诱导硅材料表面周期结构的研究

通讯作者: 闫珂柱, yankezhu@126.com;

作者简介: 高胜淼(1988-),男,硕士研究生,主要从事飞秒激光与物质相互作用方面的研究。

English Abstract

Study on periodic structures on Si surface induced by femtosecond laser

Corresponding author: YAN Kezhu, yankezhu@126.com

全文HTML

目录