镁合金表面激光熔覆技术的研究进展

陈菊芳; 王江涛; 周金宇

doi:10.7510/jgjs.issn.1001-3806.2015.05.010

镁合金表面激光熔覆技术的研究进展

1.
江苏理工学院材料工程学院, 常州 213001;
2.
江苏大学光子制造科学与技术重点实验室, 镇江 212013

作者简介: 陈菊芳(1971-),女,教授,博士,现主要从事镁合金的激光表面改性研究。E-mail:jfchen@jsut.edu.cn.

基金项目:
国家自然科学基金资助项目(51275221);江苏省高校自然科学基金资助项目(12KJB460002);常州市科技支撑(工业)资助项目(CE20130034);江苏省光子制造与技术重点实验室开放基金资助项目(GZ201202)
中图分类号: TG156.99

Research progress of laser cladding on magnesium alloy surface

1.
School of Materials and Engineering, Jiangsu University of Technology, Changzhou 213001, China;
2.
Key Laboratory for Science and Technology of Photon Manufacturing, Jiangsu University, Zhenjiang 212013, China
CLC number: TG156.99

摘要: 综述了镁合金表面激光熔覆技术的研究进展状况。介绍了镁合金表面激光熔覆工艺特点和工艺方法;阐述了工艺参量对熔覆层性能的影响;总结了当前镁合金表面激光熔覆的主要材料体系及其熔覆层的组织和性能;展望了镁合金表面激光熔覆技术今后的发展方向。
- 激光技术 /
- 激光熔覆 /
- 镁合金 /
- 研究进展
Abstract: Research progress of laser cladding on magnesium alloy was reviewed. The process characteristics and process method were introduced. Then effects of process parameters on the performance of laser cladding layers were described. The main material system of laser cladding on magnesium alloys, the microstructure and the properties of laser cladding layers in recent years were also summarized. Finally the future development was also predicated.
- laser technoique /
- laser cladding /
- magnesium alloy /
- research progress

[1]	ALAN A L. Magnesium casting technology for structural applications[J]. Journal of Magnesium and Alloys, 2013, 1(1):2-22.
[2]	MUSTAFA K K. Magnesium and its alloys applications in automotive industry[J]. The International Journal of Advanced Manufacturing, 2008, 39(9):851-865.
[3]	TEE Z W, SITI R B, CHANG S Y, et al. Effect of sliding velocity on wear behavior of magnesium composite reinforced with SiC and MWCNT[J]. Procedia Engineering, 2013, 68(3):703-709.
[4]	CHEN J F, YE X, SHEN L D, et al. Influence of laser shock processing on friction and wear properties of magnesium alloy[J]. Laser Technology, 2011, 35(5):582-585 (in Chinese).
[5]	ZHANG D F, GUO Y N, LIU Y P, et al. A composite anodizing coating containing superfine Al2O3 particles on AZ31 magnesium alloy[J]. Surface and Coatings Technology, 2013, 236(1):52-57.
[6]	ZHANG Y K, CHEN J F, LEI W N, et al. Effect of laser surface melting on friction and wear behavior of AM50 magnesium alloy[J]. Surface and Coatings Technology, 2008, 202(14):3175-3179.
[7]	SONG Y W, DONG K H, SHAN D Y, et al. Investigation of a novel self-sealing pore micro-arc oxidation film on AM60 magnesium alloy[J]. Journal of Magnesium and Alloys, 2013, 1(1): 82-87.
[8]	WANG A H, XIA H B, WANG W Y, et al. YAG laser cladding of homogenous coating onto magnesium alloy[J]. Materials Letters, 2006, 60(6):850-853.
[9]	MAJUMDAR J D, CHANDRA B R, MORDIKE B L, et al. Laser surface engineering of a magnesium alloy with Al+Al2O3[J]. Surface and Coatings Technology, 2004, 179(2):297-305.
[10]	CUI Z Q, WANG W X, WU H L, et al. Microstructure and wear resistance of AZ31B magnesium alloy by laser cladding with Al-Si/Al2O3-TiO2 powders[J]. Chinese Journal of Lasers, 2011, 38(6):0603020(in Chinese).
[11]	GAO Y L, XIONG D S, WANG C S, et al. Influences of laser powers on microstructure and properties of the coatings on the AZ91HP magnesium alloy[J]. Acta Metallurgica Sinica, 2009, 22(3):167-173 .
[12]	KIRSTEN B, NILS K, THOMAS W, et al. Investigation of wear and corrosion protection of AlSi20 coatings produced by plasma spraying and laser cladding on AZ31B[J]. Journal of Thermal Spray Technology, 2013, 22(2):207-212.
[13]	ZHANG R, XIAO Z H. Laser cladding of Fe alloy on surface of magnesium alloy[J]. Material Heat Treatment, 2009, 38(18):90-95(in Chinese).
[14]	HU Q W, YANG T P, LIU S H, et al. Study on laser cladding of copper alloy on Mg- based metal matrix composite[J]. Applied Laser, 2001, 21(4):247-250(in Chinese).
[15]	LIU Y H, GUO Z X, YANG Y, et al. Laser (a pulsed Nd:YAG) cladding of AZ91D magnesium alloy with Al and Al2O3 powders[J]. Applied Surface Science, 2006, 253(4):1722-1728.
[16]	SORIN I, PIERRE S, DOMINIQUE G, et al. Magnesium alloys laser (Nd:YAG) cladding and alloying with side injection of aluminium powder[J]. Applied Surface Science, 2004, 225(1):124-134.
[17]	SUN R L, NIU W, LEI Y W, et al. Microstructure and wear resistance of laser clad Al-Si alloy layer on magnesium alloy[J]. Transactions of Materials and Heat Treatment, 2012, 33(11):143-147(in Chinese).
[18]	BERNABE C, JESUS S, ANA R, et al. Corrosion and wear resistance improvement of magnesium alloys by laser cladding with Al-Si[J]. Physics Procedia,2011,12(3):353-363.
[19]	GAO Y L, WANG C S, PANG H J, et al. Broad-beam laser cladding of Al-Cu alloy coating on AZ91HP magnesium alloy[J]. Applied Surface Science, 2007, 253(11):4917-4922.
[20]	CUI Z Q, YANG H W, WANG W X, et al. Laser cladding Al-Si/Al2O3-TiO2 composite coatings on AZ31B magnesium alloy [J]. Journal of Wuhan University of TechnologyMaterial Science, 2012, 27(6): 1042-1047.
[21]	YANG Y, ZHUANG Y, YOU X J. Microstructure and properties of the coating formed by laser cladding of Al-Ti-C powders on magnesium[J]. Journal of Jilin University, 2010, 40(6): 1567-1571(in Chinese) .
[22]	YUE T M, LI T. Laser cladding of Ni/Cu/Al functionally graded coating on magnesium substrate[J]. Surface and Coatings Technology, 2008, 202(13):3043-3049.
[23]	HU Q W, LIU S H, LI Z Y, et al. Characteristics of the bonding interface between mg-based metallic materials composite and stainless steel layer by laser cladding[J]. Transactions of Materials and Heat Treatment, 2001, 22(4):31-35(in Chinese).
[24]	GAO Y L, WANG C S, YAO M, et al. The resistance to wear and corrosion of laser-cladding Al2O3 ceramic coating on Mg alloy[J]. Applied Surface Science, 2007, 253(12):5306-5311.
[25]	GAO Y L, WANG C S, XIONG D S, et al. Influence of laser technology parameters on preparation of amorphous coatings on magnesium alloy[J]. Transactions of Materials and Heat Treatment, 2009, 30(4): 146-155(in Chinese).
[26]	YUE T M, SU Y P. Laser cladding of SiC reinforced Zr65Al7.5Ni10Cu17.5 amorphous coating on magnesium substrate[J]. Applied Surface Science, 2008, 255(5):1692-1698.
[27]	HUANG K J, YAN L, WANG C S, et al. Wear and corrosion properties of laser cladded Cu47Ti34Zr11Ni8/SiC amorphous composite co-atings on AZ91D magnesium alloy[J]. Transactions of Nonferrous Metal Society of China, 2010, 20(7):1351-1355.
[28]	HUANG S T, DUH Y S, HSIEH T Y, et al. Thermal analysis for nano powders of iron and zinc by DSC[J]. Procedia Engineering, 2012, 45(4):518-522.
[29]	CHEN Ch J, ZHANG M, ZHANG Q M, et al. Laser surface cladding of a ZM5 magnesium alloy with nano-Al2O3[J]. Chinese Journal of Lasers, 2008, 35(11):1752-1755(in Chinese).
[30]	TIAN W, XU B, LIAO W H. Fast process planning technology of laser cladding for green remanufacturing[J]. Laser and Optoelectronics Progress, 2011, 48(11): 111401(in Chinese).
[31]	ASHISH S, SANDIP P H. Laser surface engineering of magnesium alloys:a review[J]. Journal of the Minerals Metals and Materials Society, 2012, 64(6): 716-733.
[32]	CHEN Ch J,WANG D S, GUO W Y, et al. Laser multi-layer cladding of magnesium base alloys[J]. Applied Laser, 2002, 22(2): 76-79 (in Chinese).

[1]	陈菊芳 , 张永康 , 许仁军 . 镁合金激光表面处理的研究进展. 激光技术, 2008, 32(3): 293-295,311.
[2]	唐海国 , 高明 , 曾晓雁 . 镁合金厚板激光焊缝组织及抗拉强度研究. 激光技术, 2011, 35(2): 152-155. doi: 10.3969/j.issn.1001-3806.2011.02.003
[3]	裴旭 , 任爱国 , 顾永玉 , 许仁军 , 于水生 , 张永康 . AZ91镁合金激光冲击强化力学性能研究. 激光技术, 2010, 34(4): 552-556. doi: 10.3969/j.issn.1001-3806.2010.04.032
[4]	高亚丽 , 王存山 , 张梅 , 熊党生 . 镁合金激光表面熔凝技术分析. 激光技术, 2009, 33(4): 362-365. doi: 10.3969/j.issn.1001-3806.2009.04.008
[5]	崔丽 , 张彦超 , 贺定勇 , 李晓延 , 蒋建敏 . 高功率光纤激光焊接的研究进展. 激光技术, 2012, 36(2): 154-159. doi: 10.3969/j.issn.1001-3806.2012.02.003
[6]	李兴成 , 张永康 . 激光冲击次数对镁合金电化学特性的影响. 激光技术, 2015, 39(4): 466-470. doi: 10.7510/jgjs.issn.1001-3806.2015.04.008
[7]	李兴成 , 张永康 , 周金宇 , 陈菊芳 , 卢雅琳 . 激光冲击强化AZ31镁合金表面残余应力分析. 激光技术, 2016, 40(1): 5-10. doi: 10.7510/jgjs.issn.1001-3806.2016.01.002
[8]	陈菊芳 , 叶霞 , 申来娣 , 李兴成 . 激光冲击强化对镁合金摩擦磨损性能的影响. 激光技术, 2011, 35(5): 582-585,647. doi: 10.3969/j.issn.1001-3806.2011.05.002
[9]	申来娣 , 陈菊芳 , 李兴成 , 李仁兴 . 激光冲击AM50镁合金残余应力场的有限元分析. 激光技术, 2012, 36(1): 45-49. doi: 10.3969/j.issn.1001-3806.2012.01.013
[10]	宋新华 , 金湘中 , 陈胜迁 , 袁江 , 张明军 . 激光-电弧复合焊接及应用于车身制造的进展. 激光技术, 2015, 39(2): 259-265. doi: 10.7510/jgjs.issn.1001-3806.2015.02.024
[11]	许仁军 , 张永康 , 陈菊芳 . AZ91镁合金激光表面熔凝处理的微观组织变化. 激光技术, 2008, 32(5): 487-489.
[12]	张三川 , 姚建铨 , 梁二军 . 激光熔覆进展与熔覆合金设计. 激光技术, 2002, 26(3): 204-207.
[13]	王维夫 , 孙凤久 , 王茂才 . 铝合金表面激光熔覆铜基合金涂层研究. 激光技术, 2008, 32(3): 240-243.
[14]	郑必举 , 魏金宇 , 蒋业华 , 张希俊 . 激光熔覆NiCoFeCrTi高熵合金涂层及其耐磨性能研究. 激光技术, 2016, 40(3): 432-435. doi: 10.7510/jgjs.issn.1001-3806.2016.03.028
[15]	黄安国 , 汪永阳 , 赵永 , 熊建钢 , 李志远 . 铝合金表面激光熔覆Al+Y粉末的研究. 激光技术, 2009, 33(2): 117-120.
[16]	张永忠 , 涂义 , 金具涛 , 石力开 . 不锈钢表面激光熔覆无钴镍基合金涂层研究. 激光技术, 2010, 34(1): 22-25. doi: 10.3969/j.issn.1001-3806.2010.01.007
[17]	鄢锉 , 李力钧 , 李娟 , 谢小柱 , 张屹 . 激光切割板材表面质量研究综述. 激光技术, 2005, 29(3): 270-274.
[18]	张永忠 , MEACOC CKhris , VILAR Rui . 激光微沉积合金粉末制造薄壁零件的试验研究. 激光技术, 2006, 30(6): 621-624.
[19]	李胜 , 胡乾午 , 曾晓雁 . 激光熔覆专用铁基合金粉末的研究进展. 激光技术, 2004, 28(6): 591-594.
[20]	宋杰 , 黄逸 , 庞振华 . 铁基合金激光熔覆层磨损性能研究. 激光技术, 2010, 34(3): 331-334. doi: 10.3969/j.issn.1001-3806.2010.03.013

点击查看大图

计量

文章访问数: 7976
HTML全文浏览量: 5405
PDF下载量: 260
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

镁合金表面激光熔覆技术的研究进展

作者简介: 陈菊芳(1971-),女,教授,博士,现主要从事镁合金的激光表面改性研究。E-mail:jfchen@jsut.edu.cn.

Research progress of laser cladding on magnesium alloy surface

计量

镁合金表面激光熔覆技术的研究进展

作者简介: 陈菊芳(1971-),女,教授,博士,现主要从事镁合金的激光表面改性研究。E-mail:jfchen@jsut.edu.cn

English Abstract

Research progress of laser cladding on magnesium alloy surface

全文HTML

目录

留言板

镁合金表面激光熔覆技术的研究进展

作者简介: 陈菊芳(1971-),女,教授,博士,现主要从事镁合金的激光表面改性研究。E-mail:jfchen@jsut.edu.cn.

Research progress of laser cladding on magnesium alloy surface

计量

出版历程

镁合金表面激光熔覆技术的研究进展

作者简介: 陈菊芳(1971-),女,教授,博士,现主要从事镁合金的激光表面改性研究。E-mail:jfchen@jsut.edu.cn

English Abstract

Research progress of laser cladding on magnesium alloy surface

全文HTML

目录