高功率光纤激光非熔透焊接5A06铝合金

陈根余; 黎长邹; 周聪; 张焱; 夏海龙

doi:10.7510/jgjs.issn.1001-3806.2016.01.004

高功率光纤激光非熔透焊接5A06铝合金

1.
湖南大学汽车车身先进设计制造国家重点实验室, 长沙 410082;
2.
湖南大学激光研究所, 长沙 410082

作者简介: 陈根余(1965-),男,博士,教授,主要研究方向为激光技术及其数字化加工装备、汽车车身激光制造技术、激光微细加工技术。E-mail:hdgychen@163.com.

基金项目:
国家自然科学基金资助项目(51175165);湖南省自然科学基金资助项目(14JJ3057)
中图分类号: TG456.7

Partial penetration welding of 5A06 aluminum alloy with high power fiber laser

1.
State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body, Hunan University, Changsha 410082, China;
2.
Institute for Laser Research, Hunan University, Changsha 410082, China
CLC number: TG456.7

摘要: 为了解决高功率光纤激光非熔透焊接5A06铝合金过程中,焊接熔深的控制、合金元素的烧损、焊缝表面质量的改善等方面难以兼顾的问题,采用固定激光功率和正面焊接保护气的方法,通过改变单一焊接参量,研究了焊接速率、离焦量、搭接板间间隙的变化对焊缝表面质量的影响,并对焊缝内部镁元素的分布规律进行了理论分析和实验验证。结果表明,焊缝的硬度与镁元素的分布相一致;由于熔合线附近晶粒细化和母材镁元素扩散的共同作用,使熔合线附近的硬度高于其它部位;优化参量后的非熔透激光焊接头强度大于电弧铆焊接头,间隙为0.2mm的时候,激光焊接头强度最大,为母材抗拉强度的68.1%。这一结果对指导工业中的铝合金非熔透激光焊接是有帮助的。
- 激光技术 /
- 激光焊接 /
- 非熔透焊接 /
- 5A06铝合金
Abstract: In order to solve the problems such as the control of welding penetration, the loss of alloy element and weld surface quality in the process of partial penetration welding of 5A06 aluminum alloy with high power fiber laser, the effects of welding speed, defocusing amount, and lap plate gap on the quality of weld surface were studied by changing one of the welding parameters at fixed laser power and positive welding protective gas. The distribution rule of magnesium element was analyzed theoretically and verified experimentally. The test results show that weld hardness is consistent with the distribution of magnesium element. Due to the common effect of grain refinement and magnesium element diffusion of parent metal, the hardness near fusion line is greater than the other parts. The strength of laser partial penetration welding joint with optimized parameters is greater than the strength of arc riveting joint. When the clearance is 0.2mm, the strength of laser welding joint is highest and can reach 68.1% of the tensile strength of the parent material. The results are helpful to guide the partial penetration laser welding of aluminum alloy.
- laser technique /
- laser welding /
- partial penetration welding /
- 5A06 aluminum alloy

[1]	TAO W, MA Y N, CHEN Y B, et al. Laser spot welding of LF6 aluminum alloy with filler wire[J]. Chinese Journal of Lasers, 2013, 40(11):120-127(in Chinese).
[2]	ARIF A F M. Effect of input variability on the quality of laser shock processing[J]. Journal of Mechanical Science and Technology, 2009, 23(10):2603-2611.
[3]	KAWAGUCHI I, TSUKAMOTO S, ARAKANE G, et al. Suppression of porosity by laser power modulation-Study on prevention of porosity in high power CO2 laser welding (report 3)[J]. Quarterly Journal of the Japan Welding Society, 2007, 25(2):328-335.
[4]	YANG Ch Y, CHUN M W, HU X Y, et al. Porosity in fiber laser formation of 5A06 aluminum alloy[J]. Journal of Mechanical Science and Technology, 2010, 24(5):1077-1082.
[5]	NIU R F, LIN B H,WANG Y N, et al. Magnesium loss and hardness distribution of joint in pulse laser welding of aluminum alloy[J]. Welding Journal, 2010, 31(3):81-84(in Chinese).
[6]	EL-BATAHGY A, KUTSUNA M. Laser beam welding of AA5052, AA5083, and AA6061 aluminum alloys[J]. Advances in Materials Science and Engineering, 2009, 2009:974182.
[7]	KUO T Y,LIN H C. Effects of pulse level of Nd-YAG laser on tensile properties and formability of laser weldments in automotive aluminum alloys[J]. Materials Science and Engineering, 2006, A416(1):281-289.
[8]	SIERRA G, PEYRE P, DESCHAUX-BEAUME F, et al. Steel to aluminium key-hole laser welding[J]. Materials Science and Engineering, 2007, A447(1):197-208.
[9]	AL-KAZZAZ H, MEDRAJ M, CAO X, et al. Nd:YAG laser welding of aerospace grade ZE41A magnesium alloy:modeling and experimental investigations[J]. Materials Chemistry and Physics, 2008, 109(1):61-76.
[10]	CHEN G Y, CHEN M, LI Sh Ch, et al. Research of partial penetrated laser overlap welding of thin steel sheet[J].Laser Technology, 2011, 35(5):577-581(in Chinese).
[11]	ZHANG L Q, ZHOU M Zh, CHEN Zh J, et al. Technique of non-penetration laser lap welding on galvanized steel and AISI 304 stainless steel[J]. Chinese Journal of Lasers, 2011, 38(6):148-153(in Chinese).
[12]	MEI L F, CHEN G Y, JIN X Zh, et al. Study on fiber laser overlap-welding of automobile aluminum alloy[J]. Chinese Journal of Lasers, 2010, 37(8):2091-2097(in Chinese).
[13]	ZUO T Ch. Laser processing of high strength aluminum alloy[M]. Beijing:National Defence Industry Press, 2008:47-48(in Chinese).
[14]	WANG G Zh. Study on the formation and porosity of 5754 aluminum alloy by laser lap welding with filler wire[D]. Wuhan:Huazhong University of Science and Technology, 2012:43-52(in Chinese).
[15]	CHEN G Y, ZHOU Y, ZHANG M J, et al. Study on improving the surface quality of the weld of autogenously laser welding of the thick plate with high power fiber laser[J]. Chinese Journal of Lasers, 2013,40(11):137-142(in Chinese).

[1]	余阳春 , 王春明 , 余圣甫 . 5A06 铝合金的激光填丝焊接头组织与性能. 激光技术, 2010, 34(1): 34-36,52. doi: 10.3969/j.issn.1001-3806.2010.01.010
[2]	唐代明 , 苟淑云 , 王军 . 低合金相变诱发塑性(TRIP)钢激光焊接的研究进展. 激光技术, 2012, 36(2): 145-150,178. doi: 10.3969/j.issn.1001-3806.2012.02.001
[3]	张宏圭 , 金湘中 , 陈根余 , 张明军 , 邹宇峰 . 光纤激光焊接5052铝合金镁元素烧损研究. 激光技术, 2012, 36(6): 713-718. doi: 10.3969/j.issn.1001-3806.2012.06.001
[4]	张大文 , 张宏 , 刘佳 , 石岩 . 铝合金连续-脉冲激光焊接工艺对比实验研究. 激光技术, 2012, 36(4): 453-458. doi: 10.3969/j.issn.1001-806.2012.04.006
[5]	骆红 , 胡伦骥 , 黄树槐 , 刘建华 , 胡席远 . 铝合金的激光焊接. 激光技术, 1998, 22(2): 94-98.
[6]	陈永城 , 罗子艺 , 韩善果 , 蔡得涛 , 哈斯金·弗拉基斯拉夫 . 5mm厚紫铜激光焊接接头组织及性能研究. 激光技术, 2019, 43(2): 212-216. doi: 10.7510/jgjs.issn.1001-3806.2019.02.012
[7]	王玉玲 , 张翔宇 , 胡小红 . 钛合金-不锈钢异种材料激光焊接工艺研究. 激光技术, 2017, 41(6): 816-820. doi: 10.7510/jgjs.issn.1001-3806.2017.06.010
[8]	刘顺洪 , 柳家良 , 刘辉 , 段元威 , 权雯雯 . AZ91镁合金的YAG脉冲激光焊接. 激光技术, 2010, 34(4): 459-462,469. doi: 10.3969/j.issn.1001-3806.2010.04.008
[9]	王海林 , 黄维玲 , 周卓尤 , 曹红兵 . 铝合金2007的激光焊接. 激光技术, 2003, 27(2): 103-105.
[10]	陈根余 , 陈明 , 李时春 , 谭立鹏 . 非熔透激光搭接焊薄钢板的试验研究. 激光技术, 2011, 35(5): 577-581. doi: 10.3969/j.issn.1001-3806.2011.05.001
[11]	高建昌 , 邵红红 , 许友谊 . 带防护螺母激光焊接的应用研究. 激光技术, 2006, 30(3): 271-273.
[12]	黄开金 , 林鑫 , 胡木林 , 谢长生 , 陶曾毅 . 激光焊接金刚石锯片的研究现状. 激光技术, 2006, 30(5): 486-489,493.
[13]	杨洪亮 , 金湘中 , 修腾飞 , 费鑫江 , 叶颖 . 钢/铝异种金属光纤激光焊接数值模拟. 激光技术, 2016, 40(4): 606-609. doi: 10.7510/jgjs.issn.1001-3806.2016.04.031
[14]	胡增荣 , 周建忠 , 郭华锋 , 杜建钧 . 应用ABAQUS模拟激光焊接温度场. 激光技术, 2007, 31(3): 326-329.
[15]	高明 , 曾晓雁 , 严军 , 胡乾午 , 王福德 , 邓业平 . 激光-电弧复合焊接的热源相互作用. 激光技术, 2007, 31(5): 465-468.
[16]	刘会霞 , 张惠中 , 季进清 , 王霄 , 蔡兰 . 激光焊接塑料的方法及发展现状. 激光技术, 2008, 32(2): 166-170.
[17]	彭和思 , 陈兵华 , 唐景龙 , 邓时累 , 陈根余 , 陈焱 . 激光焊接工艺对K418与0Cr18Ni9焊接接头性能的影响. 激光技术, 2018, 42(2): 229-233. doi: 10.7510/jgjs.issn.1001-3806.2018.02.017
[18]	高明 , 曾晓雁 , 胡乾午 . 低碳钢CO2激光-脉冲MAG电弧复合焊接工艺研究. 激光技术, 2006, 30(5): 498-500,506.
[19]	钟欢欢 , SINGARE Sekou , 陈盛贵 . 基于有限元法的聚碳酸酯激光焊接性能研究. 激光技术, 2015, 39(2): 209-214. doi: 10.7510/jgjs.issn.1001-3806.2015.02.014
[20]	王强 , 焦俊科 , 王飞亚 , 张文武 , 盛立远 . CFRP与不锈钢激光焊接的有限元分析. 激光技术, 2016, 40(6): 853-859. doi: 10.7510/jgjs.issn.1001-3806.2016.06.017

点击查看大图

计量

文章访问数: 6266
HTML全文浏览量: 3284
PDF下载量: 648
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

高功率光纤激光非熔透焊接5A06铝合金

作者简介: 陈根余(1965-),男,博士,教授,主要研究方向为激光技术及其数字化加工装备、汽车车身激光制造技术、激光微细加工技术。E-mail:hdgychen@163.com.

Partial penetration welding of 5A06 aluminum alloy with high power fiber laser

计量

高功率光纤激光非熔透焊接5A06铝合金

作者简介: 陈根余(1965-),男,博士,教授,主要研究方向为激光技术及其数字化加工装备、汽车车身激光制造技术、激光微细加工技术。E-mail:hdgychen@163.com

English Abstract

Partial penetration welding of 5A06 aluminum alloy with high power fiber laser

全文HTML

目录

留言板

高功率光纤激光非熔透焊接5A06铝合金

作者简介: 陈根余(1965-),男,博士,教授,主要研究方向为激光技术及其数字化加工装备、汽车车身激光制造技术、激光微细加工技术。E-mail:hdgychen@163.com.

Partial penetration welding of 5A06 aluminum alloy with high power fiber laser

计量

出版历程

高功率光纤激光非熔透焊接5A06铝合金

作者简介: 陈根余(1965-),男,博士,教授,主要研究方向为激光技术及其数字化加工装备、汽车车身激光制造技术、激光微细加工技术。E-mail:hdgychen@163.com

English Abstract

Partial penetration welding of 5A06 aluminum alloy with high power fiber laser

全文HTML

目录