一种可变长度光电基准尺

吴斌; 王晓蕾

doi:10.7510/jgjs.issn.1001-3806.2016.05.024

一种可变长度光电基准尺

吴斌,
王晓蕾

1.
天津大学精密测试技术及仪器国家重点实验室, 天津 300072

作者简介: 吴斌(1975-),男,副教授,硕士生导师,主要研究方向为工业视觉检测、大尺寸数字化测量及图像处理技术等。E-mail:wubin@tju.edu.cn.

中图分类号: TN29

A variable-length photoelectric reference scale

1.
State Key Laboratory of Precision Measuring Technology and Instrument, Tianjin University, Tianjin 300072, China
CLC number: TN29

摘要: 为了实现对非正交轴系激光经纬仪测量系统的快速、准确定向，采用构建新型光电基准尺的方法，提出并研究了一种基于高精度光电位置敏感器件的可变长度光电基准尺构建技术。阐述了非正交轴系激光经纬仪的特点，根据其特点及非正交轴系激光经纬仪测量系统定向的需要，确定了可变长度光电基准尺构建的总体思路，完成了硬件电路设计，构建了可变长度光电基准尺，并标定了两光电位置敏感探测器的空间位姿关系，以实现可变长度基准测量。结果表明，利用该可变长度光电基准尺定向后的测量系统，其相对测量精度优于0.03%，可方便、高精度地实现非正交轴系激光经纬仪测量系统的定向。
- 光电子学 /
- 可变长度光电基准尺 /
- 位置敏感探测器 /
- 激光经纬仪 /
- 系统定向 /
- 空间坐标测量
Abstract: In order to orientate a non-orthogonal shafting laser theodolite measurement system quickly and accurately, a construction technology of variable-length photoelectric reference scale was proposed based on high-precision photoelectric position sensitive detector . Firstly, the feature of a non-orthogonal shafting laser theodolite was elaborated. According to the features and the orientation requirement of a non-orthogonal shafting laser theodolite measurement system, the general idea of the construction of variable-length photoelectric reference scale was confirmed. After that, the design of hardware circuit was finished and a variable-length photoelectric reference scale was constructed. Finally, spatial position relationship between two photoelectric position sensitive detectors was calibrated to realize the measurement of variable-length reference. The experiment results show that the relative measurement accuracy of variable-length photoelectric reference scale is better than 0.03%. The orientation of a non-orthogonal shafting laser theodolite measurement system can be realized conveniently and in high-precision.
- optoelectronics /
- variable-length photoelectric reference scale /
- position sensitive detector /
- laser theodolite /
- system orientation /
- space coordinate measurement

[1]	ZHANG Z L,ZHU J G,GENG N,et al.The design of double-theodolite 3-D coordinate measurement system[J].Chinese Journal of Sensors and Actuators,2010,23(5):660-664(in Chinese).
[2]	PEGGS G N,MAROPOULOS P G,HUGHES E B,et al.Recent developments in large-scale dimensional metrology[J].Proceedings of the Institution of Mechanical Engineers,2009,B223(6):571-595.
[3]	CUYPERS W,van GESTEL N,VOET A,et al.Optical measurement techniques for mobile and large-scale dimensional metrology[J].Optics and Lasers in Engineering,2009,47(3):292-300.
[4]	MAUTZ R.Overview of current indoor positioning systems[J].Geodesy and Cartography,2009,35(1):18-22.
[5]	HOPE C,CHUAQUI M.Geotechnical instrumentation news-manual total station monitoring[J].Geotechnical News,2008,26(3):28.
[6]	WU B,WANG B.Automatic measurement in large-scale space with the laser theodolite and vision guiding technology[J].Advances in Mechanical Engineering,2013,2013(5):629385.
[7]	WU B,SU X Y.A precise guiding method for automatic measurement with visual guiding theodolites[J].Laser Technology,2015,39(4):453-457(in Chinese).
[8]	LI G Y.Principle and development trend of non-orthogonal coordinate system[J].Journal of Geomatics,2003,28(1):4-10(in Chinese).
[9]	HUANG G Y,LI G Y.Study of system orientation and coordinate calculation of IMS[J].Acta Geodaetica Et Cartocgraphica Sinica,2003,32(3):256-260(in Chinese).
[10]	WU B,YANG S.Research on measurement technology of non-orthogonal shaft laser theodolites[J].Laser Technology,2015,39(5):603-609(in Chinese).
[11]	GENG N.Study on the calibration method of theodolite coordinate measurement and system implementation[D].Tianjin:Tianjin University of Instrument Science and Technology,2010:13-20(in Chinese).
[12]	FAN Zh G,ZHANG F Sh,ZUO B J,et al.Effect of noise ray on properties of position sensitive detector[J].Laser Technology,2004,28(4):442-444(in Chinese).
[13]	KOMATSU M,OHKAWA K,TSUCHIDA N,et al.Hole position and inclination sensor with 2 dimensional PSD,and its application to automatic shaft inserting[C]//International Conference on Multisensor and Integration for Intelligent Systems.New York,USA:IEEE,1996:78-85.
[14]	SONG D Y.Research and application on technology of precise PSD micro-displacement online measurement[D].Tianjin:Tianjin University of Photoelectron Technology,2012:21-24(in Chinese).
[15]	FU J,CHU W,DIXSON R,et al.Three-dimensional image correction of tilted samples through coordinate transformation[J].Scanning,2008,30(1):41-46.

[1]	陈海平 , 赵斌 . 基于经纬仪和测距仪的空间坐标测量. 激光技术, 2013, 37(1): 77-81. doi: 10.7510/jgjs.issn.1001-3806.2013.01.019
[2]	刘子英 , 张靖 , 邓芳明 . 基于位置敏感探测器的轨距在线监测系统研究. 激光技术, 2020, 44(2): 183-189. doi: 10.7510/jgjs.issn.1001-3806.2020.02.008
[3]	范宜艳 , 赵斌 , 马国鹭 . 基于光学标靶与测距仪的隐藏区域坐标测量. 激光技术, 2014, 38(6): 723-728. doi: 10.7510/jgjs.issn.1001-3806.2014.06.001
[4]	王红敏 , 罗自赢 , 李蕾 , 彭俊玲 . 平行度误差激光准直法测量技术研究. 激光技术, 2022, 46(5): 674-679. doi: 10.7510/jgjs.issn.1001-3806.2022.05.016
[5]	姚萍萍 , 赵欣 , 张毅 , 赵平建 , 涂碧海 . 激光测高仪中雪崩光电二极管的探测性能分析. 激光技术, 2008, 32(6): 628-630,634.
[6]	赵忠伟 , 张玉钧 , 沈超 . 脉冲激光引信光电转换系统的设计. 激光技术, 2012, 36(3): 326-329.
[7]	石英亮 , 张羽 , 孙力军 . 激光器对光电振荡器相位噪声的影响. 激光技术, 2015, 39(6): 761-764. doi: 10.7510/jgjs.issn.1001-3806.2015.06.006
[8]	范志刚 , 张凤生 , 左保军 , 何瑾 . 位置敏感探测器受杂光干扰特性的研究. 激光技术, 2004, 28(4): 442-444.
[9]	蒋晓东 , 于纪言 , 朱立坤 . 基于位置敏感探测器的组合导航技术研究. 激光技术, 2019, 43(3): 335-340. doi: 10.7510/jgjs.issn.1001-3806.2019.03.009
[10]	江桓 , 吴华君 , 吴云峰 . 一种新型超宽带光电探测模块的研究. 激光技术, 2013, 37(1): 16-19. doi: 10.7510/jgjs.issn.1001-3806.2013.O1.004
[11]	徐伟 , 金韬 , 池灏 . 耦合式光电振荡器的理论与实验研究. 激光技术, 2014, 38(5): 579-585. doi: 10.7510/jgjs.issn.1001-3806.2014.05.001
[12]	邹广健 , 张宝富 , 滕义超 , 卢麟 , 葛海波 . 星上光电振荡器的微波信号产生与转发研究. 激光技术, 2017, 41(4): 582-585. doi: 10.7510/jgjs.issn.1001-3806.2017.04.025
[13]	吴斌 , 苏晓越 . 一种视觉引导经纬仪自动测量中精确引导方法. 激光技术, 2015, 39(4): 453-457. doi: 10.7510/jgjs.issn.1001-3806.2015.04.005
[14]	曾贤贵 , 夏晶 , 胡同欢 , 杨青林 . 基于锁相放大器和LabVIEW的激光功率测量系统. 激光技术, 2015, 39(3): 295-299. doi: 10.7510/jgjs.issn.1001-3806.2015.03.002
[15]	李雷 , 唐守锋 . 共享激光器的分布式光纤气体传感系统. 激光技术, 2014, 38(3): 384-388. doi: 10.7510/jgjs.issn.1001-3806.2014.03.022
[16]	曹延昌 , 熊继军 , 侯庆志 . 可调谐半导体激光器的精密控制系统设计. 激光技术, 2015, 39(3): 316-319. doi: 10.7510/jgjs.issn.1001-3806.2015.03.007
[17]	王宗清 , 段军 , 曾晓雁 . 大功率半导体激光器高精度温控系统研究. 激光技术, 2015, 39(3): 353-356. doi: 10.7510/jgjs.issn.1001-3806.2015.03.016
[18]	方刘海 , 文继国 , 江月成 , 潘冬 , 帅欣 . 基于数字滤波的半导体激光器温控系统设计. 激光技术, 2016, 40(5): 701-705. doi: 10.7510/jgjs.issn.1001-3806.2016.05.017
[19]	高平东 , 张法全 . 高精度半导体激光器温控系统的设计与实现. 激光技术, 2014, 38(2): 270-273. doi: 10.7510/jgjs.issn.1001-3806.2014.02.026
[20]	廖志烨 , 邓洪峰 , 吴凌华 , 张恩华 , 张宇 . 基于半导体激光器高精度恒温系统设计. 激光技术, 2012, 36(6): 771-775. doi: 10.3969/j.issn.1001-3806.2012.06.015

点击查看大图

计量

文章访问数: 6017
HTML全文浏览量: 3598
PDF下载量: 267
被引次数: 0

姓名
邮箱
手机号码
标题
留言内容
验证码

留言板

一种可变长度光电基准尺

作者简介: 吴斌(1975-),男,副教授,硕士生导师,主要研究方向为工业视觉检测、大尺寸数字化测量及图像处理技术等。E-mail:wubin@tju.edu.cn.

A variable-length photoelectric reference scale

计量

一种可变长度光电基准尺

作者简介: 吴斌(1975-),男,副教授,硕士生导师,主要研究方向为工业视觉检测、大尺寸数字化测量及图像处理技术等。E-mail:wubin@tju.edu.cn

English Abstract

A variable-length photoelectric reference scale

全文HTML

目录

留言板

一种可变长度光电基准尺

作者简介: 吴斌(1975-),男,副教授,硕士生导师,主要研究方向为工业视觉检测、大尺寸数字化测量及图像处理技术等。E-mail:wubin@tju.edu.cn.

A variable-length photoelectric reference scale

计量

出版历程

一种可变长度光电基准尺

作者简介: 吴斌(1975-),男,副教授,硕士生导师,主要研究方向为工业视觉检测、大尺寸数字化测量及图像处理技术等。E-mail:wubin@tju.edu.cn

English Abstract

A variable-length photoelectric reference scale

全文HTML

目录