[1] |
ZHOU K J, LIU Sh J. Research on scale factor of closed-loop depolarized fiber gyroscope[J].Laser Infrared, 2013, 43(3):286-290(in Chinese). |
[2] |
BAI J Y, JING Zh H, WEI Y. Fiber optic depolarizer and its application[J]. Aerospace Shanghai, 2005, 22(4):45-48(in Chinese). |
[3] |
WANG Sh M, LIU Ch, MU X D, et al. Study on nonreciprocal phase error in depolarized gyros[J]. Laser Infrared, 2002, 32(3):336-338(in Chinese). |
[4] |
WEI B, ZHU J L, LI Y B, et al. Method to reduce the drift of reflective fiber-optic current sensor[J]. Laser Infrared, 2014, 44(3):265-268(in Chinese). |
[5] |
ZHANG J H. Analysis of Lyot optical fiber depolarizer by mueller matrix[J].Journal of Shanghai University(Natural Science Edition), 2002, 8(2):141-144(in Chinese). |
[6] |
TAKESUE H, YAMAMOTO F, SHIMIZU K, et al. Stabilization of pulsed light-wave circulating.around an amplified fiber-optic ring incorporating a lyot depolarizer[J].IEEE Photonics Technology Letters, 1998, 10(12):104-107. |
[7] |
MATAR M, BASSETT I M, GORDON B, et al. An improved lyot fiber depolarizer[C]//Optical Fiber Measurements.New York,USA:IEEE,2004:127-130. |
[8] |
ZHOU K J, QIN W. The theory and development of fiber-optic depolarizer[J].Piezo Electrics Acousto Optics, 1997, 19(4):7-10(in Chinese). |
[9] |
BOHM K, PETERMANN K. Performance of Lyot depolarizers with birefringent single-mode fibers[J]. Journal of Lightwave Technology, 1983, 1(1):71-74. |
[10] |
SANDE J C, PIQUERO G,TEIJEIRO C. Polarization changes at Lyot depolarizer output for different types of input beams [J].Journal of the Optical Society of America, 2012, 29(3):278-284. |
[11] |
CHEN J L, LI H B, LIU Y B. Comparison of sensitivity between two types of optical current sensors[J]. Laser Technology, 2007, 31(4):378-380(in Chinese). |
[12] |
BURNS W K. Degree of polarization in the Lyot depolarizer[J]. Journal of Lightwave Technology, 1983, 1(3):475-479. |
[13] |
ZHANG Ch, YI X S, YANG Y M, et al . Effects of degree of polarization of SLD on the performance of fiber optic gyroscope[J]. Infrared and Laser Engineering, 2009, 38(3):509-514(in Chinese). |