Laser texturing of spherical cap slight protuberance profile on mould & die surface
-
Corresponding author:
FU Yong-hong, fyh@ujs.edu.cn
;
-
Received Date:
2008-07-07
Accepted Date:
2008-08-19
-
Abstract
With the aim of reducing wear and prolonging working life of a mould die,laser texturing technology was applied to the surface of the mould die.In the experiment,a 200W lamp pumped Nd:YAG laser was adopted to process the mould die surface.Then the rule of the effect of laser parameters on the micro profile of the mould die was obtained after experiments.Finally,the expected profile was obtained.The surface hardness and metallographic structure were measured and analyzed.The results showed that the surface hardness of slight protuberance was improved 30%~40% compared with that of the substrate and the wear resistance of mould die was improved too.
-
-
References
[1]
|
JIANG J F,HE Y H,YAN Y G,et al.Research on laser texturing process and surface quality control[J].Proc SPIE,2000,4088:240-243. |
[2]
|
DU D,HE Y F,SUI B,et al.Laser texturing of rollers by pulsed Nd:YAG laser[J].Materials Processing Technology,2004,161(3):456-461. |
[3]
|
HE Y F,DU D,LIU Y,et al.Para metric analysis of pulsed Nd:YAG laser text uring process[J].Laser Technology,2003,27(1):8-10(in Chinese). |
[4]
|
HE Y F,DU D,SUI B,et al.Laser texturing of spherical cap slight protuberance profile on roll surface[J].Applied Laser,2002,22(3):327-330(in Chinese). |
[5]
|
LIU Y,CHEN D R,YANG W Y.Experimental investigation of laser-textured on roller with micro-convex topography[J].Chinese Journal of Mechanical Engineering,2003,39(7):107-110(in Chinese). |
[6]
|
ZHU M Zh.Technology and experiment tal study on roll surface texturing with pulse RF CO2 laser[D].Wuhan:Huazhong University of Science & Technology,2006:41-47(in Chinese). |
[7]
|
XUE Y,CHEN P F,ZHU M Zh.Experimental research on RF used in roller texturing[J].Optics & Optoelectronic Technology,2007,5(4):16-19(in Chinese). |
[8]
|
POTERASU M,DASCALU T,MARIAN A,et al.Nd:YAG laser surface texturing[J].Proc SPIE,1999,3045:233-240. |
-
-
Proportional views
-