Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 40 Issue 1
Nov.  2015
Article Contents
Turn off MathJax

Citation:

Test method for birefringence of Fourier quarter-wave-plate

  • Corresponding author: HUANG Ziqiang, zqhuang@188.com
  • Received Date: 2014-10-28
    Accepted Date: 2014-11-05
  • In order to measure the phase modulation of liquid crystal optical phased arrays(LCOPA) automatically with high resolution and high precision, Fourier quarter-wave-plate (FQW) method was adopted. On the basis of the conventional /4 wave-plate method, combined with the discrete Fourier transform algorithm to process data, higher accuracy was attained in spite of the influence of vibration and noise in surroundings. In the experiments, automatic test was accomplished with a computer controlling the stepping motor combing accessory devices such as CCD and FQW. The results showed that the repetitive test precision was less than 0.3 taking a standard /4 wave-plate as a test sample. The near-field phase distribution for a LCOPA developed by ourselves was obtained and its phase cycle and phase valley between the electrodes was observed.
  • 加载中
  • [1]

    McMANAMON P. An overview of optical phased array technology and status[J].Proceedings of the SPIE, 2005,5947:59470I.
    [2]

    RESLER D P, HOBBS D S, SHARP R C, et al. High-efficiency liquid-crystal optical phased-array beam steering[J]. Optics Letters, 1996, 21(9):689-691.
    [3]

    KONG L J,Zh Y,SONG Y, et al. A beam steering approach of liquid crystal phased array based on nonperiodic blazed grating[J].Acta Optica Sinica, 2011, 31(1):211-216(in Chinese).
    [4]

    SHI L, McMANAMON P F, BOS P J. Liquid crystal optical phase plate with a variable in-plane gradient[J]. Journal of Applied Physics, 2008, 104(3):033109.
    [5]

    WANG X R,TAN Q G,HUANG Z Q, et al. Dual beam formation and 2-D san technique of liquid crystal optical phased array[J].Laser Technology, 2013, 37(5):631-635(in Chinese).
    [6]

    XU L, WU L Y, ZHANG J, et al. Effect of phase valley on diffraction efficiency of liquid crystal optical phased array[J].Proceedings of the SPIE, 2008,7133:71333L.
    [7]

    WU S T, EFRON U, HESS L D. Birefringence measurements of liquid crystals[J]. Applied Optics, 1984, 23(21):3911-3915.
    [8]

    ZHANG Zh Y, DENG Y Y, WANG D G, et al. Comparison and analysis of several methods for measuring wave plate retardation[J]. Optics and Precision Engineering, 2007, 15(11):1678-1685(in Chinese).
    [9]

    QI M Ch, HUANG Z Q, YAO Zh Sh, et al. The measurement of phase delay of 2-D distribution characteristics of liquid crystal electro-optic devices[J]. Chinese Journal of Lasers, 2014,41(s1):s108004(in Chinese).
    [10]

    ZHAO X, LIU C, ZHANG D, et al. Direct investigation and accurate control of phase profile in liquid-crystal optical-phased array for beam steering[J]. Applied Optics, 2013, 52(29):7109-7116.
    [11]

    HUANG Z Q. Principle of liquid crystal display[M]. Beijing:National Defence Industry Press, 2008:39-60(in Chinese).
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(5658) PDF downloads(497) Cited by()

Proportional views

Test method for birefringence of Fourier quarter-wave-plate

    Corresponding author: HUANG Ziqiang, zqhuang@188.com
  • 1. Reseach Institute of Electronic Science and Technology, University of Electronic Science and Technology of China, Chengdu 611731, China;
  • 2. School of Optoelectronic Information, University of Electronic Science and Technology of China, Chengdu 610054, China

Abstract: In order to measure the phase modulation of liquid crystal optical phased arrays(LCOPA) automatically with high resolution and high precision, Fourier quarter-wave-plate (FQW) method was adopted. On the basis of the conventional /4 wave-plate method, combined with the discrete Fourier transform algorithm to process data, higher accuracy was attained in spite of the influence of vibration and noise in surroundings. In the experiments, automatic test was accomplished with a computer controlling the stepping motor combing accessory devices such as CCD and FQW. The results showed that the repetitive test precision was less than 0.3 taking a standard /4 wave-plate as a test sample. The near-field phase distribution for a LCOPA developed by ourselves was obtained and its phase cycle and phase valley between the electrodes was observed.

Reference (11)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return