Advanced Search

ISSN 1001-3806 CN 51-1125/TN Map

Volume 24 Issue 5
Sep.  2013
Article Contents
Turn off MathJax
Article Navigation >  LASER TECHNOLOGY  > 2000 >  24(5): 281-284

Citation:
shu

Laser cutting of Al-silicate fibre reinf orced ZL109 matrix composition

  • 1.

    Department of Machatronic Engineering, South China University of Technology, Guangzhou, 510641;

  • 2.

    National Laboratory of Laser Technology, HUST, Wuhan, 430074

  • Received Date: 1999-06-14
  • This paper deals with the laser cutting parameters for Al-silica te short fibre reinforced aluminum matrix composite and the heat-affecting zone(HAZ) of laser interaction.The results show that under the condition of 2kW CO2 laser and cutting velocity of 1～8m/min,penetrated and narrow cutting kerf and small HAZ had been gotten on composite samples whose thickness is from 1 to 4.2mm. Because of the effect of heat conduction,the microstructure of HAZ of laser cutting samples is different from that of the original composite and subsequently precipitated a silicon rich phase by the melted Al-silicate fibres.
  • 加载中
  • [1] 黄岳山,李文芳,蒙继龙.材料开发与应用,1998;13(2):26~29
    [2] 陆树荪,顾开道,郑来苏.铸造有色金属及其熔炼.北京:国防工业出版社,1983:20
    [3]

    Wolf F.Silicon Semiconduct or Data. New York:Signtics Corporation,1969
    [4] 安继儒,荆秀枝.中外常用金属材料手册.西安:西安交通大学出版社,1990
    [5] 武恭.铝及铝合金材料手册.北京:科学出版社,1994
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索
Get Citation
PDF
XML

Article views(2584) PDF downloads(400) Cited by()

Proportional views

Laser cutting of Al-silicate fibre reinf orced ZL109 matrix composition

  • 1. Department of Machatronic Engineering, South China University of Technology, Guangzhou, 510641;
  • 2. National Laboratory of Laser Technology, HUST, Wuhan, 430074
  • Received Date: 1999-06-14
  • Available Online: 2000-09-25

Abstract: This paper deals with the laser cutting parameters for Al-silica te short fibre reinforced aluminum matrix composite and the heat-affecting zone(HAZ) of laser interaction.The results show that under the condition of 2kW CO2 laser and cutting velocity of 1～8m/min,penetrated and narrow cutting kerf and small HAZ had been gotten on composite samples whose thickness is from 1 to 4.2mm. Because of the effect of heat conduction,the microstructure of HAZ of laser cutting samples is different from that of the original composite and subsequently precipitated a silicon rich phase by the melted Al-silicate fibres.

    HTML

Reference (5)

Catalog

    Copyright © Laser Technology. 蜀ICP备10038222号-1

    Address：No. 7, Section 4, Renmin South Road, Chengdu, Sichuan Province, China Postal Code：610041  Telephone：028-68011091/68011046  Email： jgjs@vip.163.com,  jgjs@sina.com

    Supported by: Beijing Renhe Information Technology Co. Ltd  support: info@rhhz.net

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return