The analysis and manufacture of plastic fiber couplers
-
Received Date:
2004-09-07
Accepted Date:
2004-10-10
-
Abstract
A novel plastic optical fiber(POF) power coupler manufactured with the ultrasonic welding method is investigated.The manufacture process is feasible and convenient.The relation is discussed between the coupling ratio and its main work variables,including the length and thickness of the coupling section and the distance between two fiber axes.The experimental result is identical with the computer simulation result basically.Some measures are provided to reduce the excess loss.The manufactured plastic fiber coupler can satisfy the demand of short-distance communication in coupling ratio and excess loss.
-
-
References
[1]
|
SUN D F,LIU L.Prospect of market and technology of plastic optical fiber[J].World Telecommunications,2002,15(8):20~23(in Chinese). |
[2]
|
YANG Ch,SUN X H,WANG Y M et al.1×7 cylindrical mixing-rod plastic optical fiber coupler[J].Acta Optica Sinica,2001,21(9):1116~1122(in Chinese). |
[3]
|
GE W P,LI Zh H,YIN Z M et al.A novel 1×4 plastic optical fiber power coupler[J].Acta Optica Sinica,2003,23(8):961~963(in Chinese). |
[4]
|
YUUKI H,ITO T,SUGIMOTO T.Plastic star coupler[J].SPIE,1991,1592:2~11. |
[5]
|
IMOTO K,SANO H,MAEDA M.Plastic optical fiber star coupler[J].Appl Opt,1986,25(19):3443~3447. |
[6]
|
LI Y,WANG T,FASANELLA K.Cost-effedtive side-coupling polymer fiber optics for optical interconnections[J].IEEE Journal of Lightwave Technolgy,1998,16(5):892~901. |
[7]
|
AI J,LI Y.Mixing-rod power coupling for large-core polymer optical fibers[J].Opt Engng,1999,38(60):1024~1028. |
[8]
|
BERGH R A,KOTLER G,SHAW H J.Single-mode fiber optic directional coupler[J].Electron Lett,1980,16(7):260~261. |
[9]
|
XU B J,DRIVER R D,GANIS J et al.Direct bonding yields low-cost plastic star couplers[J].Laser Focus,1988,24(4):180~190. |
-
-
Proportional views
-