Microstructure and mechanical property analyses of the metal parts direct fabricated by laser cladding

JI Sheng-qin; LI Peng; ZENG Xiao-yan

Some tensile samples of stainless steel have been fabricated directly by laser cladding with three path-filling models.The results show that the fracture character of tensile samples with high bond strength is ductile rupture,and the yielded strength and rupture strength are higher than the corresponding values of samples with the conventional processing methods.The orientation of laser scanning has no significant influence on tensile performance.Microstructure analyses of tensile samples by SEM show that crystalline grains are very fine and have the orientated solidification structures.

Corresponding author: ZENG Xiao-yan, xyzeng@mail.hust.edu.cn

1. National Laboratory of Laser Technology, HUST, Wuhan 430074, China

Received Date: 2005-02-25

Accepted Date: 2005-03-22

Available Online: 2006-03-25

Abstract: Some tensile samples of stainless steel have been fabricated directly by laser cladding with three path-filling models.The results show that the fracture character of tensile samples with high bond strength is ductile rupture,and the yielded strength and rupture strength are higher than the corresponding values of samples with the conventional processing methods.The orientation of laser scanning has no significant influence on tensile performance.Microstructure analyses of tensile samples by SEM show that crystalline grains are very fine and have the orientated solidification structures.

HTML

Reference (10)

[1]	ZHONG M L,NING G Q,LIU W J.Research and development on laser direct manufacturing metallic components[J].Laser Technology,2002,26 (5):388～391 (in Chinese).
[2]	YANG S,ZHONG M L,ZHANG Q M et al.New techniques to rapidly manufacture metal parts with laser[J].Laser Technology,2001,25(4):254～257(in Chinese).
[3]	XI M Zh,ZHANG Y Zh,ZHANG P Zh et al.Influence of processing parameter on the microstructure and properties of the 316L SS fabricated by laser direct deposition[J].Chinese Journal of Lasers,2002,29(11):1045～1048(in Chinese).
[4]	ZHANG Y Zh,SHI L K,ZHANG P Zh et al.The newest advance in laser rapid forming of metallic powders[J].Rare Metal Materials and Engineering,2000,29(6):361～365 (in Chinese).
[5]	WU X H,LIANG J,MEI J F et al.Microstructures of laser-deposited Ti6Al-4V[J].Materials and Design,2004,25(2):137～144.
[6]	WU X,SHARMAN R,MEI J F et al.Direct laser fabrication and microstructure of a burn-resistant Ti alloy[J] Materials and Design,2002,23(3):239～247.
[7]	XUE L,CHEN J Y,ISLAM M U.Laser consolidation of Ni-based IN-738 superalloy for repairing gas turbine blades[A].Proceedings of the Lair Materials Processing Conference[C].Orlando:Laser Institute of America,2000.31.
[8]	ZHANG Y Zh,XI M Zh,SHI L K et al.Research on laser direct deposition of 316L stainless steel[J].Journal of Materials Engineering,2002(5):22～25(in Chinese).
[9]	GAO Sh Y,ZHANG Y Zh,SHI L K et al.Mechanical properties of TC4 alloy fabricated by laser direct deposition[J].Chinese Journal of Rare Metals,2004,28 (1):29～33 (in Chinese).
[10]	WANG H M,ZHANG L Y,LI A et al.Progress on rapid solidification laser processing for advanced materials and components[J].World Science-Technology RD,2004,26 (3):27～31 (in Chinese).

Microstructure and mechanical property analyses of the metal parts direct fabricated by laser cladding

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Proportional views