Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 30 Issue 2
Sep.  2013
Article Contents
Turn off MathJax

Citation:

Numerical simulation of laser-generated ultrasonic by finite element method in the transparent coating-substrate system

  • Corresponding author: SHEN Zhong-hua, nxw@mail.njust.edu.cn
  • Received Date: 2005-03-09
    Accepted Date: 2005-05-26
  • The finite element model of the thermal conductive equation and the thermo-elastic equation in the system consisting of a transparent coating and a opaque substrate is established based on the analysis of the stability of solution and two important parameters,meshing size and time step.Taking into account the temperature dependence of material properties,the transient temperature is obtained.The near-axis normal waveforms at the epicenter generated by thermo-elastic effect are obtained.The influence of the coating thickness on the waveform is analyzed.
  • 加载中
  • [1]

    SCHNEIDER D,STIEHL E,HAMMER R et al.Nondestructive testing of damage layers in semiconductor materials by surface acoustic waves[J].Proc SPIE,2002,4692:195~211.
    [2]

    ZHANG Sh Y.Laser ultrasound and materials nondestructive evaluation[J].Applied Acoustics,1992,11 (4):1~6.
    [3]

    XU B Q,SHEN Zh H,NIX W et al.Time/frequency analysis of lasergenerated ultrasonic wave in coating/substrate systems[J].Lair Technology,2004,28 (6):609~612 (in Chinese).
    [4]

    CHEN X,XU R Q,SHEN Zh H et al.Reflected laser ultrasonic sensor for testing thickness and its application[J].Laser Technology,2003,27(6):557~559(in Chinese).
    [5]

    McDONALD A F.On the precursor in laser-generated ultrasound waveforms in metals[J].A P L,1990,56 (3),230~232.
    [6]

    ROSE L R F.Point-source representation for laser-generated ultrasound[J].J Acoust Soc Amer,1984,75(3):723~732.
    [7]

    HU W X,QIAN M L.Numerical and experimental study on the ultrasonic displacement field generated by a laser line source[J].Acta Acustica,2000,25 (4):345~350 (in Chinese).
    [8]

    CHENG J C,ZHANG S Y.Quantitative theory for laser-generated Lamb waves in orthotropic thin plates[J].A P L,1999,74 (14):2087~2091.
    [9]

    ROSA G,PSYLLAKI P,OLTRA R et al.Simultaneous laser generation and laser ultrasonic detection of the mechanical breakdown of a coating-substrate interface[J].Ultrasonics,2001,39(5):355~365.
    [10]

    ROSA G,OLTRA R,NADAL M.Evaluation of the coating-substrate adhesion by laser-ultrasonics:modeling and experiments[J].J A P,2002,91 (10):6744~6753.
    [11]

    XU B Q,SHEN Zh H,LU J et al.Numerical simulation of laser-induced transient temperature field in film-substrate system byfinite element method[J].International Journal of Heat and Mass Transfer,2003,46 (25):4963~4968.
    [12]

    XU B Q,SHEN Zh H,NIX W et al.Numerical simulation of laserinduced ultrasonic by finite element method[J].J A P,2004,95(4):2116~2123.
    [13]

    WANG G Q.Practical numerical simulation technology in engineering and practice in ANSYS[M].Xi'an:Publishing Company of Northeast University of Technology,2001.151~164(in Chinese).
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(2768) PDF downloads(305) Cited by()

Proportional views

Numerical simulation of laser-generated ultrasonic by finite element method in the transparent coating-substrate system

    Corresponding author: SHEN Zhong-hua, nxw@mail.njust.edu.cn
  • 1. Department of Applied Physics, Nanjing University of Science and Technology, Nanjing 210094, China;
  • 2. Faculty of Science, Jiangsu University, Zhenjiang 212013, China

Abstract: The finite element model of the thermal conductive equation and the thermo-elastic equation in the system consisting of a transparent coating and a opaque substrate is established based on the analysis of the stability of solution and two important parameters,meshing size and time step.Taking into account the temperature dependence of material properties,the transient temperature is obtained.The near-axis normal waveforms at the epicenter generated by thermo-elastic effect are obtained.The influence of the coating thickness on the waveform is analyzed.

Reference (13)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return