Research of substrate preheating for laser metal deposition shaping

SUN Shao-ni

In order to decrease the temperature gradient between sample and substrate,reduce and suppress the thermal stress,improve the quality of sample forming,a substrate preheating system for laser metal deposition shaping(LMDS) is developed.It consists of substrates preheater,intelligent proportion-integral-derivation controller and computer serial collecting and feedback control components.Using the self-developed LMDS system and substrate preheating system,the actual experiments are conducted.Experimental results show that substrate preheating can significantly improve the quality of the sample and reduce the thermal stress during shaping process.

1. College of Mechanical Engineering and Automation, Northeastern University, Shenyang 110004, China

Received Date: 2007-09-18

Accepted Date: 2007-10-08

Available Online: 2008-12-25

Abstract: In order to decrease the temperature gradient between sample and substrate,reduce and suppress the thermal stress,improve the quality of sample forming,a substrate preheating system for laser metal deposition shaping(LMDS) is developed.It consists of substrates preheater,intelligent proportion-integral-derivation controller and computer serial collecting and feedback control components.Using the self-developed LMDS system and substrate preheating system,the actual experiments are conducted.Experimental results show that substrate preheating can significantly improve the quality of the sample and reduce the thermal stress during shaping process.

HTML

Reference (11)

[1]	SHI Y S,ZHONG J W,CAI D S,et al.Investigation on the preheating temperature control based on part's slicing in selective laser sintering[J].Chinese Journal of Mechanical Engineering,2006,42(6):67-72(in Chinese).
[2]	LI X S,SHI Y S,HUANG S H.Investigation on preheating of powder in SLS machine[J].Chinese Journal of Mechanical Engineering,2002,38(3):94-98(in Chinese).
[3]	CHENG J,CAI D S,SHI Y S.Numerical simulation of temperature field of preheating process in selective laser sintering[J].New Technology New Process,2006(5):75-77(in Chinese).
[4]	LONG R Sh,LIU W J.Numerical simulation of thermal stress on laser metal deposition shaping[J].High Technology Letters,2007,17(2):46-51(in Chinese).
[5]	LONG R Sh,LIU W J,SHANG X F.Numerical simulation of temperature field on laser metal deposition shaping[J].Laser Technology,2007,31(4):394-396(in Chinese).
[6]	ZHANG J Y,GAO L X,CUI L L,et al.Analysis of the temperature field induced by laser strengthening[J].Laser Technology,2006,30(1):56-59(in Chinese).
[7]	ZENG D W,XIE Ch Sh.A numerical simulation for three dimensional quasi state fluid flow field and temperature field in molten pool for composite coating system[J].Laser Technology,2000,24(6):370-374(in Chinese).
[8]	WANG X F,LÜ X D,CHEN G N,et al.Simulation and verification of the temperature field in laser hardening[J].Laser Technology,2004,28(2):162-165(in Chinese).
[9]	XI M Zh,YU G.Numerical simulation for the transient temperature field of 3-D moving laser molten pool[J].Chinese Journal of Lasers,2004,31(12):1527-1532(in Chinese).
[10]	XI M Zh,ZHANG Y Zh,SHI L K,et al.Numerical simulation of 3-D transient temperature field in thin-wall metal parts fabricated by laser direct deposition[J].The Chinese Journal of Nonferrous Metals,2003,13(4):887-892(in Chinese).
[11]	YANG J.Research on mechanical behavior of laser rapid forming metal part[D].Xi'an:Northwestern Polytechnical University,2004:35-69(in Chinese).

Research of substrate preheating for laser metal deposition shaping

Abstract

References

Proportional views

通讯作者: 陈斌, bchen63@163.com

Proportional views