Simulation of pulse fiber amplifier with high peak power based on MOPA method
-
1.
School of Electronics and Information Engineering, Sichuan University, Chengdu 610064, China;
-
2.
Southwest Institute of Technical Physics, Chengdu 610041, China
-
Corresponding author:
CHEN Jian-guo, optics_lab@163.com
-
Received Date:
2008-01-28
Accepted Date:
2008-05-04
-
Abstract
In order to obtain certain laser pulse with millijoule(mJ) order energy and nanosecond(ns) order pulse width after amplifying the pulsed seed laser, and to find the impact of repetition rate and simulated Raman scattering on laser pulse output, the dynamic model of a three-class ytterbium-doped double-clad fiber pulsed amplifier was established on the base of master oscillator power amplifier.Then the pulse energy,peak power,average power,pulse width and stimulated Raman scattering effect,arose from an amplifier of the pulsed seed laser with 10nJ energy and 100ns pulse width at different pulse repetition frequency,were simulated.The simulation results show that output laser energy and waveform are so slightly affected by the frequency that its effect can be ignored when the pulse repetition frequency is less than 200Hz,and that the Raman effect almost has little impact on the output property of each class amplifier if suitable parameters are selected.According to the numerical analysis,mJ order energy can be obtained from a three-class fiber amplifier with suitable parameters.
-
-
References
|
[1]
|
LOU Q H,ZHU J Q,ZHOU J,et al.Double cladding fiber laser and it's application in military[J].Journal of the Academy of Equipment Command Technology,2003,14(5):28-32(in Chinese). |
|
[2]
|
ZHANG F P,LOU Q H,ZHOU J,et al.High power double-clad fiber amplifiers[J].Laser Optoelectronics Progress,2007(1):38-44(in Chinese). |
|
[3]
|
KONG L F,LOU Q H,ZHOU J,et al.Pulsed double-clad fiber laser[J].Laser Optoelectronics Progress,2003(5):28-32(in Chinese). |
|
[4]
|
XU D P,LI M Zh,LU X J,et al.Numerical simulation of characteristics of high power ytterbium-doped double-clad fiber amplifier[J].High Power Laser and Particle Beams,2007,19(7):1071-1076(in Chinese). |
|
[5]
|
DUAN Y F,HUANG B C,ZHANG P,et al.All-fiber laser pulse amplifier[J].Chinese Journal of Lasers,2007,34(10):1379-1382(in chinese). |
|
[6]
|
LOU Q H,ZHOU J,KONG L F,et al.Recent progress of high power pulsed double cladding fiber lasers[J].Chinese Journal of Quantum Electronics,2005,22(4):510-515(in Chinese). |
|
[7]
|
WANG Y.Optimization of pulse amplification in ytterbium-doped double-clad fiber amplifiers[J].Journal of Lightwave Technology,2005,23(6):2139-2147. |
|
[8]
|
WANG Y,PO H.Dynamic characteristics of double-clad fiber amplifiers for high-power pulse amplification[J].Journal of Lightwave Technology,2003,21(10):2262-2270. |
|
[9]
|
LIU G H,LIU D M.Numerical analysis of Raman effects in high power fiber lasers[J].Laser Technology,2007,31(3):298-300(in Chinese). |
-
-
Proportional views
-
Map
DownLoad: