Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 32 Issue 2
Apr.  2010
Article Contents
Turn off MathJax

Citation:

Study on photoluminescence characteristic of zinc sulfide/porous Si composites

  • Corresponding author: LI Qing-shan, qsl@qfnu.edu.cn
  • Received Date: 2007-01-17
    Accepted Date: 2007-03-29
  • In order to study the photoluminescence property of zinc sulfide/porous Si composites,porous Si samples were prepared by electrochemical anodization,and zinc sulfide films were deposited on porous Si substrates by pulsed laser deposition.The photoluminescence spectra were measured.The results showed that,under different excitation wavelengths(340nm,360nm,390nm),the photoluminescence spectra of zinc sulfide/porous Si composites were different,and the relative(blue/red) integrated intensities were also different;When zinc sulfide films were grown at different temperatures(100℃,250℃,350℃),zinc sulfide/porous Si composites also presented different photoluminescence property,with the increase of growth temperature,the luminescence intensity of zinc sulfide increased but the luminescence intensity of porous Si decreased;When porous Si substrates were prepared at different current densities(3mA/cm2,9mA/cm2,11mA/cm2),the optical property of zinc sulfide/porous Si composites was also different.Under proper preparing current density conditions of porous Si,the blue,green emission from zinc sulfide combining with the red emission from porous Si,a broad photoluminescence band(450nm~700nm) in the visible region was obtained,exhibiting intensively white light emission.This offers a cheap route for the realization of white light-emitting diodes.
  • 加载中
  • [1]

    NASRALLAH T B,AMLOUK M,BERNEDE J C,et al.Structure and morphology of sprayed ZnS thin films[J].Physics Status Solidi,2004,201(14):3070-3076.
    [2]

    VELUMANI S,ASCENCIO J A.Formation of ZnS nanorods by simple evaporation technique[J].Appl Phys,2004,A79(1):153-156.
    [3]

    MCLAUGHLIN M,SAKEEK H F,MAGUIRE P,et al.Properties of ZnS thin films prepared by 248nm pulsed laser deposition[J].A P L,1993,63(14):1865-1867.
    [4]

    JIU Zh X,ZHANG B L,YAO N.ZnS thin film deposited by pulsed lasers and its luminescent characteristic[J].Laser Technology,2004,28(6):620-624(in Chinese).
    [5]

    MOROZOVA N K,KARETNIKOV I A,PLOTNICHENKO V G,et al.Transformation of luminescence centers in CVD ZnS films subjected to a high hydrostatic pressure[J].Semiconductors,2004,38(1):36-41.
    [6]

    CHEN S Y,ZENG M G,WANG Sh J,et al.Fabrication of the ZnS thin film electroluminescence devices on silicon substrate[J].Journal of Xiamen University(Natural Scicence),2003,42(6):723-726(in Chinese).
    [7]

    BANDIC Z Z,PIQUETTE E C,MCCALDIN J O,et al.Solid phase recrystallization of ZnS thin films on sapphire[J].A P L,1998,72(22):2862-2864.
    [8]

    MCCAMY J W,LOWNDES D H,BUDAI J D,et al.Epitaxial ZnS films grown on GaAs(001) and(111) by pulsed-laser ablation[J].J A P,1993,73(11):7818-7822.
    [9]

    GOKARNA A,PAVASKAR N R,SATHAYE S D,et al.Electroluminescence from heterojunctions of nanocrystalline CdS and ZnS with porous silicon[J].J A P,2002,92(4):2118-2124.
    [10]

    XING D S,SHI J X,GONG M L,et al.Luminescence modulation of porous silicon-zinc sulfide nanocomposite by in situ synthesis of zinc sulfide[J].Chemical Journal of Chinese Universities,2004,25(1):24-26(in Chinese).
    [11]

    CANHAM L T.Silicon quantum wire array fabrication by electro-chemical and chemical dissolution of wafers[J].A P L,1990,57(10):1046-1048.
    [12]

    LIAO L Sh,BAO X M,MIN N B.Two kinds of photoluminescence spectra in porous silicon[J].Journal of Semiconductor,1995,16(2):145-148(in Chinese).
    [13]

    LIU Y L,LIU Y C,YANG H,et al.The optical properties of ZnO films grown on porous Si templates[J].J Phys,2003,D36(21):2705-2708.
    [14]

    ZHANG P,KIM P S,SHAM T K.Nanostructured CdS prepared on porous silicon substrate:structure,electronic,and optical properties[J].J A P,2002,91(9):6038-6043.
    [15]

    XU D Sh,GUO G L,GUI L L.Controlling growth and field emission property of aligned carbon nanotubes on porous silicon[J].A P L,1999,75(4):481-484.
    [16]

    FAN Sh Sh,CHAPLINE M G.Self-oriented regular arrays of carbon nanotubes and their field emission properties[J].Science,1999,283(5401):512-515.
    [17]

    GOKARNA A,BHORASKAR S V,PAVASKAR N R,et al.Optoelectronic characterization of porous silicon/CdS and ZnS systems[J].Physics Status Solidi,2000,A182(1):175-179.
    [18]

    CHEN Q W,ZHU D L,ZHU C.A way to obtain visible blue light emission in porous silicon[J].A P L,2003,82(7):1018-1020.
    [19]

    PROKES S M,FREITAS J A,Jr,SEARSON P C.Microluminescence depth profiles and annealing effects in porous silicon[J].A P L,1992,60(26):3295-3297.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(18358) PDF downloads(183) Cited by()

Proportional views

Study on photoluminescence characteristic of zinc sulfide/porous Si composites

    Corresponding author: LI Qing-shan, qsl@qfnu.edu.cn
  • 1. Department of Physics and Electronic Science, Binzhou Univercity, Binzhou 256603, China;
  • 2. College of Physics and Engineering, Qufu Normal University, Qufu 273165, China;
  • 3. Department of Physics, Ludong University, Yantai 264025, China

Abstract: In order to study the photoluminescence property of zinc sulfide/porous Si composites,porous Si samples were prepared by electrochemical anodization,and zinc sulfide films were deposited on porous Si substrates by pulsed laser deposition.The photoluminescence spectra were measured.The results showed that,under different excitation wavelengths(340nm,360nm,390nm),the photoluminescence spectra of zinc sulfide/porous Si composites were different,and the relative(blue/red) integrated intensities were also different;When zinc sulfide films were grown at different temperatures(100℃,250℃,350℃),zinc sulfide/porous Si composites also presented different photoluminescence property,with the increase of growth temperature,the luminescence intensity of zinc sulfide increased but the luminescence intensity of porous Si decreased;When porous Si substrates were prepared at different current densities(3mA/cm2,9mA/cm2,11mA/cm2),the optical property of zinc sulfide/porous Si composites was also different.Under proper preparing current density conditions of porous Si,the blue,green emission from zinc sulfide combining with the red emission from porous Si,a broad photoluminescence band(450nm~700nm) in the visible region was obtained,exhibiting intensively white light emission.This offers a cheap route for the realization of white light-emitting diodes.

Reference (19)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return