Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 31 Issue 5
May  2010
Article Contents
Turn off MathJax

Citation:

Application of surface activation in local laser bonding

  • Corresponding author: SHI Tie-lin, tlsh@hust.edu.cn
  • Received Date: 2006-07-25
    Accepted Date: 2006-08-31
  • A new bonding technique to alleviate the high temperature adverse effect in silicon-glass bonding process was presented which combines the advantages of surface activated direct bonding and local laser bonding techniques.RCA solution was used to make the bonding surfaces hydrophilic and the silicon-glass prebonding was accomplished at room temperature.The laser with a wavelength of 1064nm was used and its spot diameter was 500μm and the power was 70W.Without any external pressure,the prebonded pairs were bonded locally and the bonding strength reaches 6.3MPa~6.8Mpa.The experimental results of show that this bonding technique,which employs surface activated prebonding to substitute pressure to maintain the intimate contact of bonding chips,has overcome the disadvantages that focusing is difficult and bonding chips and glass cover are easy to broken in normal local laser bonding processing.This technique also improves the efficiency of surface activated direct bonding by shortening the annealing time.
  • 加载中
  • [1]

    LU J Sh,YAN P,GONG M L et al.Thermal bonding and its application in laser system[J].Optical Technique,2002,28(4):355~359(in Chinese).
    [2]

    ZHOU H,LAI J J,DENG Q et al.Finite element analysis of temperature field of localized laser heating[J].Infrared Technology,2003,25(6):82~83(in Chinese).
    [3]

    WANG J Ch.Development and expectation of laser welding technology[J].Laser Technololgy,2000,27(5):486~489(in Chinese).
    [4]

    MESCHEDER U M,ALAVI M,HILTMANN K et al.Local laser bonding for low temperature budget[J].Physica,2002,A97~98(1):422~427.
    [5]

    LUO Ch,LIN L W.The application of nanosecond-pulsed laser welding technology in mems package in with a shadow mask[J].Physica,2002,A97~98(1):398~404.
    [6]

    TAN A W Y,TAY F E H.Localized laser assisted eutectic bonding of quartz and silicon by Nd:YAG pulsed-laser[J].Physica,2005,A120(2):550~561.
    [7]

    WILD M J,GILLNER A,POPRAWE R.Locally selective bonding of silicon and glass with laser[J].Physica,2001,A93(1):63~69.
    [8]

    ANDO D,OISHI K,NAKAMURA T et al.Glass direct bonding technology for hermetic seal package[J].IEEE MEMS 97 Proceedings Tenth Annual International Workshop,1997,1(1):186~190.
    [9]

    QING G.Surface activation enhanced low temperature silicon waferbonding[D].Durham:Department of Mechanical Engineering and Materials Science,Duke University,2000.4~7.
    [10]

    XIAO Zh X,WU G Y,LI Zh H et al.Silicon-glass wafer bonding with silicon hydrophilic fusion bonding technology[J].Physica,1999,A72(1):46~48.
    [11]

    CHEN M X,YI X J,GAN Z Y,Reliability of anodically bonded silicon-glass packages[J].Physica,2005,A120(1):291~295.
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(4087) PDF downloads(549) Cited by()

Proportional views

Application of surface activation in local laser bonding

    Corresponding author: SHI Tie-lin, tlsh@hust.edu.cn
  • 1. School of Mechanic Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China;
  • 2. Wuhan National Laboratory for Opto-electronics, Wuhan 430074, China

Abstract: A new bonding technique to alleviate the high temperature adverse effect in silicon-glass bonding process was presented which combines the advantages of surface activated direct bonding and local laser bonding techniques.RCA solution was used to make the bonding surfaces hydrophilic and the silicon-glass prebonding was accomplished at room temperature.The laser with a wavelength of 1064nm was used and its spot diameter was 500μm and the power was 70W.Without any external pressure,the prebonded pairs were bonded locally and the bonding strength reaches 6.3MPa~6.8Mpa.The experimental results of show that this bonding technique,which employs surface activated prebonding to substitute pressure to maintain the intimate contact of bonding chips,has overcome the disadvantages that focusing is difficult and bonding chips and glass cover are easy to broken in normal local laser bonding processing.This technique also improves the efficiency of surface activated direct bonding by shortening the annealing time.

Reference (11)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return