Advanced Search

ISSN1001-3806 CN51-1125/TN Map

Volume 36 Issue 3
Mar.  2012
Article Contents
Turn off MathJax

Citation:

Direct laser writing of thin platinum film resistors

  • Corresponding author: WU Bo, yfwu_72@163.com
  • Received Date: 2011-07-12
    Accepted Date: 2011-09-13
  • In order to study the application of laser direct writing technology in the fabrication of thin platinum film resistors,platinum resistors in 2m thick were manufactured by means of laser direct writing.The fabrication mechanism of thin platinum film resistors was discussed.Taking strip platinum resistors as an example,the effect of the laser parameters on the figures of platinum resistors was studied.A 0.37 strip thin platinum film resistor was manufactured under the condition that the optimal laser pulse repetition frequency was 18kHz and the laser scanning speed was 100mm/s.Finally,the resistance of the platinum resistors was tested.The results indicate that the width of platinum resistor increases with the increase of laser pulse frequency and the increase of laser scan frequency independently.The edge of the manufactured resistor is neat and the surface is smooth.The relative deviation of the actual resistance to the theoretical one is only 0.8%.
  • 加载中
  • [1]

    LU J,CHU J,HUANG W H,et al.Preparation of thick Pb(Zr,Ti)O3 (PZT) film by electrostatic spray deposition (ESD) for application in micro-system technology[J]. Applied Physics,2002,41 (6):4317-4320.
    [2]

    KONDO I,YONEYAMA T.Formation of high adhesive and pure Pt lasers on TiO2[J].Journal of Vacuum Science Technology,1992,A10(6):3456-3459.
    [3]

    LEE W,KIM Y,KIM H.Pt-base electrodes and effects on phase formations and electrical properties of high dielectric thin films[J].Thin Solid Flims,1995,269 (1/2):75-79.
    [4]

    KUSHIDA K A.Pt/TiN electrodes for stacked memory with polysilicon plug utilizing PZT films[J].Integrated Ferroelectrics,1996,13(1/3):113-119.
    [5]

    SALGUEIRRO J R,ROMAN J F,MORENO V.System for laser writing to lithograph masks for integrated optics[J].Optical Engineering,1998,37(4):1115-1123.
    [6]

    HARURNA M,TAKAHASHI M,WAKAHAYASHI K,et al.Laser beam lithographed micor-Fresnel lenses[J].Applied Optic,1990,29(34):5120-5126.
    [7]

    BABER S C Application of high resolution laser writers to computer generated holograms and binary diffractive optics[J].Proceedings of SPIE,1989,1052:66-76.
    [8]

    KOTECKI D E. High-K dielectric materials for DRAM capacitors[J].Semiconductor International,1996,19(12):109-110.
    [9]

    ZHANG F,ZENG X Y,LI X Y,et al.Laser etching and cutting printed circuit board by 355nm and 1064nm diode pumped solid-state lasers[J].Chinese Journal of Lasers,2008,35 (10):1637-1643 (in Chinese).
    [10]

    LIANG F C,HUJ,XU Z J.Realization of electric control of laser direct writing mesh on concave spherical substrate[J].Optics and Precision Engineering,2006,14(5):792-796 (in Chinese).
    [11]

    WEI G J,SHAO J,ZHOU X H,et al.Laser direct writing system of fabricating binary optical elements[J].Journal of Optoelectronics.Laser,2006,17(10):1213-1215(in Chinese).
    [12]

    LUO P,WU Y F,YUE S,et al.Polygonal approximating algorithm of digital curves for bitmap laser marking[J].Laser Technology,2011,35(3):372-375 (in Chinese).
    [13]

    LIU J W,ZENG X Y.Status and prospect of laser direct writing[J].Laser Journal,2001,22(6):15-18(in Chinese).
    [14]

    SUN J F,TANG J H,GUO X G.The analysis of laser trimming resistance technical on the resistance value precision[J].Applied Laser,2004,24(3):139-141 (in Chinese).
  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Article views(3362) PDF downloads(626) Cited by()

Proportional views

Direct laser writing of thin platinum film resistors

    Corresponding author: WU Bo, yfwu_72@163.com
  • 1. School of Optoelectronic Information, University of Electronic Science and Technology of China, Chengdu 610054, China

Abstract: In order to study the application of laser direct writing technology in the fabrication of thin platinum film resistors,platinum resistors in 2m thick were manufactured by means of laser direct writing.The fabrication mechanism of thin platinum film resistors was discussed.Taking strip platinum resistors as an example,the effect of the laser parameters on the figures of platinum resistors was studied.A 0.37 strip thin platinum film resistor was manufactured under the condition that the optimal laser pulse repetition frequency was 18kHz and the laser scanning speed was 100mm/s.Finally,the resistance of the platinum resistors was tested.The results indicate that the width of platinum resistor increases with the increase of laser pulse frequency and the increase of laser scan frequency independently.The edge of the manufactured resistor is neat and the surface is smooth.The relative deviation of the actual resistance to the theoretical one is only 0.8%.

Reference (14)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return