[1] |
李伯民, 赵波, 李清. 磨料、磨具与磨削技术[M]. 北京: 化学工业出版社, 2010: 38-40.LI B M, ZHAO B, LI Q. Abrasives and grinding techniques[M]. Beijing: Chemical Industry Press, 2010: 38-40(in Chinese). |
[2] |
丁文锋, 苗情, 李本凯, 等. 面向航空发动机的镍基合金磨削技术研究进展[J]. 机械工程学报, 2019, 55(1): 189-215.DING W F, MIAO Q, LI B K, et al. Review on grinding technology of nickel-based superalloys used for aero-engine[J]. Journal of Mechanical Engineering, 2019, 55(1): 189-215(in Chinese). |
[3] |
焦锋, 李成龙, 牛赢, 等. 砂轮修整技术研究现状与展望[J]. 中国机械工程, 2021, 32(20): 2435-2448 doi: 10.3969/j.issn.1004-132X.2021.20.006JIAO F, LI Ch L, NIU Y, et al. Review and prospect of grinding wheel dressing technique[J]. China Mechanical Engineering, 2021, 32(20): 2435-2448(in Chinese). doi: 10.3969/j.issn.1004-132X.2021.20.006 |
[4] |
邓辉, 陈根余, 周聪, 等. 超硬磨料砂轮激光修整技术的现状与展望[J]. 强激光与粒子束, 2014, 26(7): 309-314.DENG H, CHEN G Y, ZHOU C, et al. Status and prospect of laser truing and dressing technique for superabrasive grinding wheels[J]. High Power Laser and Particle Beams, 2014, 26(7): 309-314(in Chinese). |
[5] |
孙康健, 陈根余, 余春荣, 等. 砂轮激光修整设备及参量选择的研究[J]. 激光技术, 2011, 35(6): 721-724. doi: 10.3969/j.issn.1001-3806.2011.06.001SUN K J, CHEN G Y, YU Ch R, et al. Selection of equipment and parameters used in laser turing and dressing grinding wheels[J]. Laser Technology, 2011, 35(6): 721-724(in Chinese). doi: 10.3969/j.issn.1001-3806.2011.06.001 |
[6] |
陈根余, 陈冲, 卜纯, 等. 激光在线修整青铜金刚石砂轮数值仿真与试验[J]. 激光技术, 2012, 36(4): 433-437. doi: 10.3969/j.issn.1001-3806.2012.04.001CHEN G Y, CHEN Ch, BU Ch, et al. Numerical simulation and experiment for on-line truing and dressing of bronze-bonded diamond grinding wheels with laser[J]. Laser Technology, 2012, 36(4): 433-437(in Chinese). doi: 10.3969/j.issn.1001-3806.2012.04.001 |
[7] |
陈根余, 李宗根, 邓辉, 等. 脉冲光纤激光修锐青铜金刚石砂轮试验研究[J]. 激光技术, 2013, 37(6): 705-711.CHEN G Y, LI Z G, DENG H, et al. Experimental study about dressing bronze-bonded diamond grinding wheels with pulsed fiber laser[J]. Laser Technology, 2013, 37(6): 705-711(in Chinese). |
[8] |
周聪, 张玲, 陈根余, 等. 激光修锐砂轮工艺参量的预测和优化算法[J]. 激光技术, 2015, 39(3): 320-324.ZHOU C, ZHANG L, CHEN G Y, et al. Prediction and optimization algorithm of process parameters for laser dressing grinding wheels[J]. Laser Technology, 2015, 39(3): 320-324(in Chinese). |
[9] |
ZHOU W, CHEN G Y, PAN H J, et al. Laser precision profiling of small-angle bevel-edge contour grinding wheels[J]. Journal of Materials Processing Technology, 2022, 305: 117591. doi: 10.1016/j.jmatprotec.2022.117591 |
[10] |
邓辉, 陈根余, 周聪, 等. 脉冲激光切向整形径向修锐青铜金刚石砂轮[J]. 中国激光, 2014, 41(11): 1103003.DENG H, CHEN G Y, ZHOU C, et al. Pulsed laser tangential profiling and radial sharpening of bronze-bonded diamond grinding wheels[J]. Chinese Journal of Lasers, 2014, 41(11): 1103003 (in Chinese). |
[11] |
柯晓龙, 郭隐彪, 王振忠, 等. 圆弧金刚石砂轮精密修形与精度评价技术[J]. 厦门大学学报(自然科学版), 2013, 52(6): 797-801.KE X L, GUO Y B, WANG Zh Zh, et al. Research on precision truing and accuracy evaluation technique for arc diamond truer[J]. Journal of Xiamen University(Natural Science Edition), 2013, 52(6): 797-801(in Chinese). |
[12] |
刘荣. 人工神经网络基本原理概述[J]. 计算机产品与流通, 2020(6): 35, 81.LIU R. Overview of the basic principles of artificial neural networks[J]. Computer Products and Distribution, 2020(6): 35, 81 (in Chinese). |
[13] |
蔡荣辉, 崔雨轩, 薛培静. 三层BP神经网络隐层节点数确定方法探究[J]. 电脑与信息技术, 2017, 25(5): 29-33. doi: 10.3969/j.issn.1005-1228.2017.05.009CAI R H, CUI Y X, XUE P J, et al. Research on the methods of determining the number of hidden nodes in three-layer BP neural network[J]. Computer and Information Technology, 2017, 25(5): 29-33(in Chinese). doi: 10.3969/j.issn.1005-1228.2017.05.009 |
[14] |
周妃四, 李时春, 陈曦, 等. 激光增材制造工艺参数优化建模研究进展[J]. 激光技术, 2023, 47(4): 469-479.ZHOU F S, LI Sh Ch, CHEN X, et al. Research progress in modeling the optimization of process parameters of laser additive manufacturing[J]. Laser Technology, 2023, 47(4): 469-479(in Chinese). |
[15] |
李朝静, 唐幼纯, 黄霞. BP神经网络的应用综述[J]. 劳动保障世界(理论版), 2012(8): 71-74.LI Zh J, TANG Y Ch, HUANG X. Review on the application of BP neural network[J]. World of Labor Security (Theoretical Edition), 2012(8): 71-74(in Chinese). |
[16] |
潘峰, 李卫星, 高琪. 粒子群优化算法与多目标优化[M]. 北京: 北京理工大学出版社, 2013: 16-18.PAN F, LI W X, GAO Q. Particle swarm optimization algorithm and multi-objectiveoptimization[M]. Beijing: Beijing Institute of Technology Press, 2013: 16-18(in Chinese). |
[17] |
赵维浩, 苏宾, 夏筱筠. 一种易跳出局部最优的粒子群优化算法[J]. 电子测试, 2017(13): 53-54.ZHAO W H, SU B, XIA X Y. Aparticle swarm optimization algorithm of easily skipping local optimum[J]. Electronic Test, 2017(13): 53-54(in Chinese). |
[18] |
SASHMITA P, GANAPATI P. Performance evaluation of a new BP algorithm for a modified artificial neural network[J]. Neural Processing Letters, 2020, 51(2): 1-21. |
[19] |
李岩, 袁弘宇, 于佳乔, 等. 遗传算法在优化问题中的应用综述[J]. 山东工业技术, 2019(12): 242-243.LI Y, YUAN H Y, YU J Q, et al. Review on the application of genetic algorithm in optimization problems[J]. Shandong Industrial Technology, 2019(12): 242-243(in Chinese). |
[20] |
CERF R. The quasispecies regime for the simple genetic algorithm with roulette-wheel selection[J]. Advances in Applied Probability, 2017, 49(3): 903-926. doi: 10.1017/apr.2017.26 |
[21] |
赵欣, 叶庆卫, 周宇. 一种保持PSO与GA独立性的混合优化算法[J]. 计算机工程与应用, 2009, 45(26): 53-55.ZHAO X, YE Q W, ZHOU Y. Hybrid optimization algorithm maintaining independence of PSO and GA[J]. Computer Engineering and Applications, 2009, 45(26): 53-55(in Chinese). |